+-
« previous next »
Pages: [1]   Go Down

Author Topic: LT500 leakdown test - what intake & exhaust plugs?  (Read 518 times)

Offline

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 234
  • Gender: Male
  • Location: WI
LT500 leakdown test - what intake & exhaust plugs?
« on: January 09, 2014, 10:56:47 am »
So I'd like to have my Quadzilla leak tested prior to an upcoming trip. I've got a guy with a tester but not the plugs needed to do the job.
Anyone know what "plugs" I could buy to allow me to get this done?
Logged
06 Raptor 700 (EFI)
Lexx 46mm race tip
pro design air filter mod
Power Commander V

Share on Bluesky Share on Facebook

Offline

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 2493
  • Gender: Male
  • Location: Cincinnati OH
Re: LT500 leakdown test - what intake & exhaust plugs?
« Reply #1 on: January 09, 2014, 01:19:10 pm »
Measure your intake and exhaust diameter and go to Home Depot. Is the tester going through the spark plug hole? If so make sure you don't go over like 7 psi it's not a car engine and you'll blow the crank seals out at like 10 psi+ I believe.
Logged

Offline

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 2209
  • Gender: Male
  • Location: ohio
Re: LT500 leakdown test - what intake & exhaust plugs?
« Reply #2 on: January 09, 2014, 05:35:33 pm »
exhaust port is smaller than 2in, 1 7/8 plug will work fine. take off exhaust flange and stuff it in. and the intake is the same. you can get a 2in plug if it has the 3 rubber ribs on it, its a tight fit. but it will work. lowes has them or tractor supply or rural king.
Logged
life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sidays totally worn out shouting "HOLY SH*T...WHAT A RIDE!"
Pages: [1]   Go Up
« previous next »
 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store