+-
« previous next »
Pages: [1]   Go Down

Author Topic: Compression And Fly Wheel Question  (Read 486 times)

Offline

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 162
  • Gender: Male
  • Mix'in & Kick'in
  • Location: michigan
Compression And Fly Wheel Question
« on: January 21, 2013, 09:37:52 pm »
Ok compression #s on a stock bore? And any fly wheel mods  for the DIY guys looking to lighten it up a little thanks 
Logged

Share on Bluesky Share on Facebook

Offline

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 2209
  • Gender: Male
  • Location: ohio
Re: Compression And Fly Wheel Question
« Reply #1 on: January 22, 2013, 11:21:06 am »
If you have a large fly wheel that is lightned a small fly wheel that is stock will still way less.
Maybe try looki g fora small hub fly wheel
Logged
life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sidays totally worn out shouting "HOLY SH*T...WHAT A RIDE!"

Offline

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 162
  • Gender: Male
  • Mix'in & Kick'in
  • Location: michigan
Re: Compression And Fly Wheel Question
« Reply #2 on: January 22, 2013, 12:14:22 pm »
What's some ways to lighten the stock one?
Logged

Offline

  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 2058
Re: Compression And Fly Wheel Question
« Reply #3 on: January 22, 2013, 12:52:47 pm »
I read the large flywheel is more reliable, bigger rivets.

Now for lightening purposes it's better to have the small flywheel?
Logged
87 HPR LT500
04 Roll LOBO II TRX250R
06 LTR450
87 LT500
85 & 86 LT250
86 & 87 TRX250R
07 & 09 Husqvarna TE450
00 CR125R

Offline

  • CEO BRP
  • Trade Count: (0)
  • Trail Blazer
  • ******
  • Posts: 772
  • BRaP Small block 302, Released and Running
Re: Compression And Fly Wheel Question
« Reply #4 on: January 22, 2013, 12:55:24 pm »
He just told you the best route. Unless you already have a small hub then just weld it, the other option is to have it machined. There is no DIY unless your a machinist. If you want the lighest you can go find a pvl and have fun starting it.
The large hub is the most reliable with no work.
Logged

Offline

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 162
  • Gender: Male
  • Mix'in & Kick'in
  • Location: michigan
Re: Compression And Fly Wheel Question
« Reply #5 on: January 22, 2013, 04:27:36 pm »
Ok so leave fly wheel alone any one know stock compression # need to test mine
Logged

Offline

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 2209
  • Gender: Male
  • Location: ohio
Re: Compression And Fly Wheel Question
« Reply #6 on: January 22, 2013, 04:30:20 pm »
you should get it welded, that is one of the good things to have done. rivits do wear out, but if its
welded no worrys
Logged
life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sidays totally worn out shouting "HOLY SH*T...WHAT A RIDE!"

Offline

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 162
  • Gender: Male
  • Mix'in & Kick'in
  • Location: michigan
Re: Compression And Fly Wheel Question
« Reply #7 on: January 22, 2013, 04:34:00 pm »
She's not broken just looking to get a little better throttle response but sounds like leave her along
Logged
Pages: [1]   Go Up
« previous next »
 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store