Author Topic: clutch slipping i think (Read 540 times)

87zillaman · « **on:** August 25, 2015, 05:09:10 pm »

ok so lt 500 when i shift into 3 and get on it. its all most like the clutch is slipping i think because it revs allmost like there is no load on the engine and its like its stops pulling hard. do you think it sounds like the clutches

Rainman56 · « **Reply #1 on:** August 26, 2015, 06:22:12 pm »

Does it do it in 4th or 5th?

87zillaman · « **Reply #2 on:** August 27, 2015, 03:33:02 pm »

Glamisrider · « **Reply #3 on:** August 28, 2015, 06:29:52 am »

If your plates are all within spec. (Spec can be found in the manual).

Get a set of 6 Barnett 85/86 lt250 springs and you'll be good to go up to 70 HP.

You can also run OEM 85/86 springs but there just a tad shorter and don't have as long of throw.

Rainman56 · « **Reply #4 on:** August 28, 2015, 07:50:18 am »

Definitely sounds like clutch slipping.Generally with higher the gear you go the more slippage you,ll get.

News:

Author Topic: clutch slipping i think (Read 540 times)

87zillaman

clutch slipping i think

Rainman56

Re: clutch slipping i think

87zillaman

Re: clutch slipping i think

Glamisrider

Re: clutch slipping i think

Rainman56

Re: clutch slipping i think

Suzuki Quadracer HQ Store Zone