+-

Author Topic: 87 lt500r start up idle issue.......  (Read 2895 times)

Offline

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 14
Re: 87 lt500r start up idle issue.......
« Reply #25 on: May 26, 2016, 03:01:30 pm »
Will do. Seems like this could definitely be the issue killing my top end. On way home now to test it

Offline

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 14
Re: 87 lt500r start up idle issue.......
« Reply #26 on: May 26, 2016, 04:05:41 pm »
Well, pulled the cap out to relieve spring tension and then put it back and one full turn counter clockwise to set it. Still seems to be lacking at the upper mid-top end. I rode it a bit longer today to let it get good and cleaned out. I did notice something else though........today I went to a longer stretch and went all the way deep into 5th. Starting from a slow roll in 1st and laying into it, it seems to fall on its face pretty quick, shifting to second kind of the same thing, but once I shift to 3rd it seems to really put me back on the seat and the same way through 4th and 5th. Wasn't able to take it all the way to the top in 5th but 3rd and 4th seems pretty healthy. A lot more than 1st and second.

Offline

  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 1389
  • Gender: Male
  • Location: NWA
Re: 87 lt500r start up idle issue.......
« Reply #27 on: May 31, 2016, 07:51:17 am »
maybe a rich needle position.  drop the needle 1 clip and test again.

Offline

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 204
Re: 87 lt500r start up idle issue.......
« Reply #28 on: June 09, 2016, 04:47:17 am »
After you drop the needle, drop the FMF and get an HPR.

 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store