+-
« previous next »
Pages: [1]   Go Down

Author Topic: installing axle in carrier  (Read 345 times)

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 64
installing axle in carrier
« on: January 31, 2015, 09:37:27 pm »
so i just put new bearing and all in my rear carrier seals and all. when i put axle in should it go in tight or should it slid in new bearing easy
Logged

Share on Bluesky Share on Facebook

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 81
Re: installing axle in carrier
« Reply #1 on: January 31, 2015, 11:00:57 pm »
It should slide right in there!! Then you tighten it up to the swingarm itself!! Should be gtg
Logged

Offline

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 261
Re: installing axle in carrier
« Reply #2 on: February 01, 2015, 07:19:33 am »
Should be snug but easy.make sure all dirt and corrosion is cleaned off the axle.
Logged
Success only come before work in the dictionary.

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 64
Re: installing axle in carrier
« Reply #3 on: February 01, 2015, 07:35:49 am »
it is all clean down to metal then prime and paint and greased up it is snug no movement all new bearing and seals thanks
Logged
Pages: [1]   Go Up
« previous next »
 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store