LT500 Front Hubs (4x 166) Modded to (4 x 144)

• LT500 Front Hubs (4x 166) Modded to (4 x 144)
  Posted by Mitch Keller on 09 Oct, 2013 11:54
• Question , has anyone taken the LT500 Front Hubs (4x 166) Modded to (4 x 144) yet? been wanting to see a fabricator to see if this can be done, will re-drilling hubs the 4 x 144 pattern be in the way of the brake rotor bolts?
• 
  
• #1 Reply
  Posted by ATVMXR on 09 Oct, 2013 12:42
• I thought someone did that on the old site.  Also thought Iceracer figured out the bearing situation to just put LTZ or LTR hubs on the zilla spindle (4x144 bolt pattern)
• 
  
• #2 Reply
  Posted by Iceracer on 09 Oct, 2013 16:35
• Have to turn the center to fit the rim also turn down the outside of the HUb at the studs.   Easier route is just get a set of yfz hubs I. Honda pattern you can find them on eBay under 100 bucks you will have that in welding and machine  work.
• 
  
• #3 Reply
  Posted by Iceracer on 09 Oct, 2013 16:36
• Scratch that just remembered the 500 disk is bigger than the 250
  
• 
  
• #4 Reply
  Posted by El Diablo on 09 Oct, 2013 17:35
• Mitch, don't fight it... convert over to LTZ spindles, hubs, & brakes. You won't regret it.
• 
  
• #5 Reply
  Posted by GrkGuy on 09 Oct, 2013 17:51
• i have a set that was cut to fit them.
• 
  
• #6 Reply
  Posted by PCS on 09 Oct, 2013 21:39
• Ltz parts are cheap and easy to find
•