+-

Author Topic: LT250 Front Camber Mod  (Read 6825 times)

Offline Sublunacy

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 214
Re: LT250 Front Camber Mod
« on: November 05, 2012, 10:27:30 am »
I have a beauty thread pitch checker with the metric hole sizes aswell. Does the trick. Metric thread pitch can almost allways be described as being course or fine thread thou. the hole size most important.

Armadillo or similiar has ball joints that fit our bikes and they are adjustable width and look a little better than stock in my opinion. Im not positive that the design is as stong as stock ball joints as they have alot of metal between the joint and the mount compared to the skinny looky armadillo's. I am thinking that only 2 are needed and should perhaps be mounted on the upper aarm not the lower, if the strength is notr there.... Rockymntatv sells them for around 25 apiece :)
1992 SUZUKI LT250R
,PSI,CEET,RAD

 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store