burgard tie rods

• burgard tie rods
  Posted by Joelenway on 15 Oct, 2015 19:04
• Anyone know where I can get burgard tie rods or something that will work. Mine are 12.5 inches inside thread to inside thread. One of mine is bent I have new ends just need the tie rod thanks
• 
  
• #1 Reply
  Posted by Sublunacy on 16 Oct, 2015 08:09
• i have american star tie rods with heim joints.  thats the only place you will find heim joints on my atv.........
  
  they are stainless steel and they build them any length you need. im sure a phone call could get you some stock threaded and plus 2inch or whatefer to match your ball joints.
  
  however like i was saying heim joints on the tie rod is an upgrade but i wouldnt use them any where else unless i had to. just my two cents
• 
  
• #2 Reply
  Posted by Glamisrider on 16 Oct, 2015 11:49
• You can try Metal Tech in Glendale, AZ.  (623) 218-8368
  
  I know they make a extended tie rod set up for the 500's for their 2+2 A-Arms that use the stock Ball Joints.
  
  May be able to adapt or make you something.
  
  
  
  
• 
  
• #3 Reply
  Posted by Joelenway on 16 Oct, 2015 17:29
• I have +2 burgard A arms. One of the tie rods bent.  Obviously the tie rods are not stock. I dont know what they are i just need to know what will work. Can i buy aftermarket and where
• 
  
• #4 Reply
  Posted by Joelenway on 16 Oct, 2015 17:32
•  
• 
  
• #5 Reply
  Posted by Rogue1970 on 16 Oct, 2015 19:46
• I too have the American Star Pro-X w/ heim ends.
  
  http://www.amstarmanufacturing.com/X-SeriesTieRods.html
  
  You can get those in stock thru +4.
• 
  
• #6 Reply
  Posted by DaveRock330R on 15 Dec, 2015 18:24
• Call burgard cycle they still make stuff you might be able to get them made
• 
  
• #7 Reply
  Posted by 92lt250wannabe on 15 Dec, 2015 18:34
• Burgard is still around call Izzy here is the nymber - 717-225-6234
  
  Otherwise like others said american star makes tie rods for +2 arms.
•