Would yamaha banshee shocks fit and work on a 250r?
Yes. Shee shocks on the wifes 87.
top part of the shock is wider then the lt is may have to do some grinding
What year shee shocks will fit on the 87?
These were on it when i bought it...
Cheap bastards!! Didnt even usean American made bushing(socket)!!
Hah can you tell me what they measure eye to eye?
raptor 660 shocks work on the front of 87 and up also. just grind down upper mount of shock a bit and its good to go.
Banshee shock measures 14 3/4 of inch eye to eye. The stock lt shocks are better then a banshee shocks.
Yeah I was just wondering because the after market stuff is cheaper
the raptor shocks are 15 1/2". and the raptor 700 fits the rear if you dont run a airbox. just make a small bushing for the lower bolt.
Good shock are not cheap. For either quad really.Banshee shock will lower your ride height. did you ever get you a frame
stock lt rear shock is a good shock if its working. If you get it rebuild and get the right spring set up for your weight and style it works super well.
No I have a guy about an hour and a half away with one just have a lot of stuff going on right now my grandfather is about to pass away so I need to stick around and help my fam out with stuff
Sorry to hear that about your grand dad.
Yeah I was just wondering because the after market stuff is cheaper
By the time you have a cheap banshee shock set up for a 250 it will wind up costing the same, if not more, and a lot more testing than a bolt and go shock.
There's a reason you still see 250 shocks on 250's, if there were more viable options known, we would be the first to tell you about it.
Now if you had a blaster that would be a different story...they'll take all sorts of shocks and just about any kind of shock is an upgrade LOL
However, if your shocks are trash, you're on a budget, and you find a banshee shock that's cheaper, go for it.
Any kind of shock is better than no shock, and any kind of money left over for gas is better than no money left over for gas
Yeah I'm so fu**in pissed right now my mother is the one who opened my cousins bank acct and controlla it I had her dig out the bank book to see exactly what was in it cuz she said there was a couple hundred come to find out there's a frigging dollar something so now I can't get anything I need a frame a arms and a swing arm plus a needle bearing a spindle probably a front rim I think I might just part what's good on it out which aintbmu ain't much the motor is good just needs a seal that goes behind the front sprocket its bored .40 over everything else is stock I have all the wiring, carb, everything to do with brakes lines one front caliper
shocks front and rear a carrier in decent shape radiator and hoses clutch cable motion pro twist throttle plastic after market tie rods not even 6 months old its either part it out or try an str8en out the frame and weld the
**** outta it and gusset it everywhere idk what to do I feel like killing someone I love this quad
If anyone reads all that and could give me a general idea on what I could make off those parts id greatly appreciate it
Just take your time you will get it back together. Parts will come you find them. Just get a 9 to 5 and you will get the money you need to fix it. It all takes time!!