+-
« previous next »
Pages: [1]   Go Down

Author Topic: 250 axle question  (Read 821 times)

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 104
250 axle question
« on: January 20, 2013, 10:45:53 pm »
what was the years that the 250 had a smaller spline axle and bigger or more splined axle so the 500 or 450 hubs would fit?
Logged

Share on Bluesky Share on Facebook

Offline

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 2209
  • Gender: Male
  • Location: ohio
Re: 250 axle question
« Reply #1 on: January 20, 2013, 10:49:09 pm »
87-up 26 spline
Logged
life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sidays totally worn out shouting "HOLY SH*T...WHAT A RIDE!"

Offline

  • CEO BRP
  • Trade Count: (0)
  • Trail Blazer
  • ******
  • Posts: 772
  • BRaP Small block 302, Released and Running
Re: 250 axle question
« Reply #2 on: January 21, 2013, 07:48:46 am »
85-87 1/2 250's were 24 splines. Somewhere in 87 they switched to the 26 spline so Honda and ltr, Ltz also fit.
Logged

Offline

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 43
Re: 250 axle question
« Reply #3 on: January 21, 2013, 03:02:46 pm »
I had an 88, it also had the 24 spline axle
Logged

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 104
Re: 250 axle question
« Reply #4 on: February 25, 2013, 03:59:50 pm »
sounds good thanx
Logged

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 98
Re: 250 axle question
« Reply #5 on: March 05, 2013, 09:11:34 pm »
Yeah mines a 24 spline also I have a question how do you remove the carrier from the swing arm do you have to cut the 2 studs that hang out the back?
Logged

Offline

  • 1991 Lt250r
  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 1350
  • Gender: Male
  • Location: West Virginia
Re: 250 axle question
« Reply #6 on: March 05, 2013, 09:57:01 pm »
Quote from: JPW59165 on January 21, 2013, 03:02:46 pm
I had an 88, it also had the 24 spline axle
  My 87 had 24 spline. Someone might have switched the axle before you bought it with a 85 threw 87 and half. That is  possible someone switched before you had it. SGP parts list a 88 with 26  and they have 2 listing with the 87  24 and 26.
Logged
91 Lt250r Bartlett port and head mod v force 2 Hinson Clutch Basket Cool Head Scp Pipe and silencer ,KN air filter ,EBC clutch, Ohlins  Triple rate Shocks Redone by PEP Shocks,Stock Rear Shock Redone By Pep Shock,  DG nerf Bars , Lonestar axle 2+2,Lonestar Swingarm ,Douglas Red Label rims.

Offline

  • The Most
  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 1119
  • Kills: 9007
  • Location: Monahans TX
Re: 250 axle question
« Reply #7 on: March 06, 2013, 04:27:56 am »
Unless you've owned the quad since it was new, the only way you're going to know for sure what it has is by counting the splines.
20 years is a long time for people to change stuff out on a quad.
I've had an 87 frame with a small reed cylinder and an 89 with a 24 spline axle along with an 85-86 plastic throttle.
Logged

Offline

  • Trade Count: (0)
  • Store Admin / Classifieds / Services
  • Weekend Warrior
  • **
  • Posts: 215
Re: 250 axle question
« Reply #8 on: March 06, 2013, 06:26:06 am »
Quote from: Qracer250alllday on March 05, 2013, 09:11:34 pm
Yeah mines a 24 spline also I have a question how do you remove the carrier from the swing arm do you have to cut the 2 studs that hang out the back?

you don't cut them off.

lock 2 nuts together and unscrew them.  then you put them back in after the carrier is in the swingarm the same way, lock 2 nuts together and treads them in. 
Logged

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 98
Re: 250 axle question
« Reply #9 on: March 11, 2013, 12:06:26 pm »
Ok thanks
Logged
Pages: [1]   Go Up
« previous next »
 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store