+-
« previous next »
Pages: [1]   Go Down

Author Topic: Front hub swap on a 86  (Read 1014 times)

Offline

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 1
Front hub swap on a 86
« on: January 08, 2018, 01:01:53 pm »
Looking for some information on front hub swap for an 86 LT... wondering if a set of stock 2007 yfz450 front hub/rotor will work on my quadracer... i have seen a lot of information that confirms this but curiois if anyone has had success with this swap and if any adjustments with seals, washers, etc was needed
Logged

Share on Bluesky Share on Facebook

Offline

  • Trade Count: (0)
  • Pro Member
  • ********
  • Posts: 915
  • Location: Cincinnati, Oh
Re: Front hub swap on a 86
« Reply #1 on: January 09, 2018, 05:37:51 am »
I'm currently doing a spindle swap on my 88' using 400ex spindles/hubs and yfz450 brake calipers.  The OEM upper ball joints should work.  Last week I got the lower ball joints in the mail.  I had to get 400ex lowers that are for after market a-arms.  I haven't tried mounting them yet, but I'm pretty sure they will work.  They obviously fit in the 400ex spindles and the a-arm mounting looks to be same as OEM.  The dual piston yfz450 calipers will work on the 400ex spindles without any modification.

This is as far as I've gotten.
Logged
Pages: [1]   Go Up
« previous next »
 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store