+-

Author Topic: Liger running @ Pops Sand Drags on 4/27/13  (Read 1255 times)


Offline Stpltn250r

  • Trade Count: (0)
  • Trail Blazer
  • ******
  • Posts: 645
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #1 on: April 28, 2013, 06:16:37 pm »
Carb is still way rich. Didnt get any heat on the plug until later that night. Gearing needs to be taller. May try some smaller ro tires and see what happens.

Offline Alkyzilla

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 249
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #2 on: April 28, 2013, 08:39:27 pm »
Looking really good there Chris.   Be great to see it dialed in!   What carb?

Offline Stpltn250r

  • Trade Count: (0)
  • Trail Blazer
  • ******
  • Posts: 645
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #3 on: April 28, 2013, 08:44:57 pm »
54mm Crankshop. Jetting circuits are based of Mikuni VM jetting. Has a pilot, air jet in the bell, dumptube, main, needle and power jets. The body of the carb is based on crankshop design along with the needle and slide. Thats alot of tuning circuits. Would like to try a 52 Lectron or maybe there new 53mm but those are around 8-900 bucks!!

Offline GrkGuy

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 2207
  • Gender: Male
  • Location: ohio
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #4 on: April 29, 2013, 06:10:47 am »
pretty cool vid Chris..
life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sidays totally worn out shouting "HOLY SH*T...WHAT A RIDE!"

Offline Dezsled

  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 2058
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #5 on: April 29, 2013, 08:04:55 am »
Definitely great to see
87 HPR LT500
04 Roll LOBO II TRX250R
06 LTR450
87 LT500
85 & 86 LT250
86 & 87 TRX250R
07 & 09 Husqvarna TE450
00 CR125R

Offline Chrisr

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 225
  • Location: South Carolina
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #6 on: April 29, 2013, 10:00:52 am »
That is badass!!!!  I would love to see some pics of the quad. 
Let the good times roll.....

Offline Stpltn250r

  • Trade Count: (0)
  • Trail Blazer
  • ******
  • Posts: 645
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #7 on: April 29, 2013, 08:42:13 pm »
Some pics I shot out in the shop

Offline Stpltn250r

  • Trade Count: (0)
  • Trail Blazer
  • ******
  • Posts: 645
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #8 on: April 29, 2013, 08:51:44 pm »
There are some other singles running 4.10-4.30. Some spraying and some not. 2 stroke limited record is mat shearers saber at 3.80@81mph. 4 stroke single limited is OMW Racing DS650(8-900cc??) is 3.78@81mph.

Hopefully with higher gearing and a leaner bottom end think it will be into 3 at least.

Offline Stpltn250r

  • Trade Count: (0)
  • Trail Blazer
  • ******
  • Posts: 645
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #9 on: April 29, 2013, 09:25:48 pm »
I signed up for 4.0 heads up index and red light in the first rd with a .390 light. let out almost crossed center line and ran a 4.2 something. running against 10 mil cubs and one was a 10 mil DM but was running poorly.

Offline Chrisr

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 225
  • Location: South Carolina
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #10 on: April 29, 2013, 09:54:53 pm »
Man that's nice.  Thanks for posting pics.  Don't get to really see machines of that caliber around here.  There are a few that show up at the drag strip every now and again but they are aren't purpose built for drags like yours.   
Let the good times roll.....

Offline Dezsled

  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 2058
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #11 on: April 29, 2013, 11:16:04 pm »
Yeah thanks for posting pics. It's great to get to see what it takes to be serious
87 HPR LT500
04 Roll LOBO II TRX250R
06 LTR450
87 LT500
85 & 86 LT250
86 & 87 TRX250R
07 & 09 Husqvarna TE450
00 CR125R

Offline Cunningham_821

  • Trade Count: (0)
  • Range Rover
  • *****
  • Posts: 483
  • Gender: Male
  • I'm Slow
  • Location: Hastings pa
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #12 on: April 30, 2013, 12:45:16 pm »
bike defiently looks great. some day when i grow up im gonna have me a chassis like that!
#820
JR Motorsports
Halls Precision Racing

Offline PCS

  • Trade Count: (0)
  • Forum Moderator
  • Pro Member
  • *********
  • Posts: 970
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #13 on: April 30, 2013, 01:04:11 pm »
nice build
1985 Yamaha Tri Z 250
2006 Suzuki LTR 450
2011 Suzuki Hayabusa

Offline Stpltn250r

  • Trade Count: (0)
  • Trail Blazer
  • ******
  • Posts: 645
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #14 on: February 08, 2015, 10:56:43 am »
Been a very long time since I updated this. Have not been back to the track since the video was shot.

The rigid was torn all the way back down. Had the frame worked on a little. Had the frame, wheels and wheelie bar powdered. Switched to smaller RO 14stg & 16stg Extremes.

Upon inspection of the JJ&A axle. The main shaft was **** on the keyed sprocket hub side. Sent it back in and got full warranty. He said he would replace what he did not like. I had them anodize everything and put new bearings in the carrier.

Nitrous is wired up. I purchased a progressive controller off PS years ago for the cheap and just now got to installing it and what do you know, it does not work. Either that or I have to many volts going to it and its tripping an internal relay. So I will be getting a Leash N20 progressive controller. I have been in contact with Jim @ Boss Noss about a controller and he informed me one was in final testing awaiting approval or something to that effect. That was last year. Not getting my hopes up on that!

Sending the cylinder off to get a replate and maybe a little touchup. After I get the motor back together i will be going to a dyno to get some real testing off and on the juice!






Offline Glamisrider

  • Trade Count: (0)
  • Forum Moderator
  • Pro Member
  • *********
  • Posts: 860
  • Gender: Male
  • Location: SoCal
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #15 on: February 08, 2015, 07:16:45 pm »
Looking Good Chris,
I thought you sold your stuff and got out of dragging?

Glad to see you're back.


Offline Stpltn250r

  • Trade Count: (0)
  • Trail Blazer
  • ******
  • Posts: 645
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #16 on: February 08, 2015, 09:18:16 pm »
I sold or better say parted put my dune dragger. Attempted to sell the Liger but hard to sell something as red headed as a super modified lt500! So decided to keep working on it.

Offline Alkyzilla

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 249
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #17 on: February 10, 2015, 06:42:48 am »
That's a serious machine!  Please do share the dyno info. Engine that big should make big torque!  Do you have any other pipes to try as well?

Offline Stpltn250r

  • Trade Count: (0)
  • Trail Blazer
  • ******
  • Posts: 645
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #18 on: February 12, 2015, 07:44:24 am »
Only time I dynod it, it was 67ft lbs tq and 97hp. Shearer is the only pipe.

Offline El Diablo

  • Sandaholic
  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 1194
  • Gender: Male
  • Sandaholic / speed addict
  • Location: Yuma, Arizona
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #19 on: February 12, 2015, 09:38:23 am »
And why haven't you brought this beast out to Dome Valley Race Way?
Brian
1988 Suzuki LT-250R (The HPR test mule)
1987 Suzuki LT-500R
1990 Suzuki LT-500R
1982 Honda ATC-185S
1982 Honda ATC-250R

Offline Stpltn250r

  • Trade Count: (0)
  • Trail Blazer
  • ******
  • Posts: 645
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #20 on: February 14, 2015, 12:06:31 pm »
lack of funds, lol.

Offline Alkyzilla

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 249
Re: Liger running @ Pops Sand Drags on 4/27/13
« Reply #21 on: February 17, 2015, 08:11:21 am »
Only time I dynod it, it was 67ft lbs tq and 97hp. Shearer is the only pipe.

Good numbers!,  running just methanol I assume?  what was peak RPM before it dropped off?   well hey,  how about a pic of the curve..????

 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store