Author Topic: About To Buy A AAEN Pipe, Which Silencer Should I Get?? (Read 1556 times)

Dragzilla346 · « **on:** April 29, 2013, 07:17:15 pm »

i just about have enough saved back to buy a pipe, looking at the AAEN, but dont know which silencer i should get cause they list a few. looking for the better one for performance.

Johnny Rage · « **Reply #1 on:** April 29, 2013, 07:22:46 pm »

I got the ceramic coated pipe with regular silencer, its nice 580.00 shipped to my door. Its is loud imo, so if you are in a area that gets checked, or have neighbors that are within 1/2 mile lol maybe opt for mega silencer? mine fit just fine, but some were having fitment issues. best bang for your buck imo

Johnny Rage · « **Reply #2 on:** April 29, 2013, 07:25:29 pm »

oh and remember you may need a sparky too!

Dragzilla346 · « **Reply #3 on:** April 29, 2013, 07:28:03 pm »

im setting it up for drags so noise isnt an issue, and if it doesnt fit perfect, ill make it fit like it should with some gool ol fabrication and welding lol. im gonna opt for the raw finish for the time being. and i wont need a sparky

Dezsled · « **Reply #4 on:** April 29, 2013, 07:53:03 pm »

should look into mitch's DCS 5 too

STARPUSS · « **Reply #5 on:** April 29, 2013, 09:02:17 pm »

if you want to Drag race , Why install a Silencer at all?

I am not going to run one with mine when it's done.

(Note: I am going to Buy the DCS 5 ) And Run a pipe to the back where the silencer should be.

BadMoonRacing500 · « **Reply #6 on:** April 29, 2013, 09:41:38 pm »

Get the small silencer, the big one with the sparky is known too be to restrictive and pops motors.

Dirtzilla · « **Reply #7 on:** April 29, 2013, 11:12:43 pm »

here is the 2 different ones available, i could sell you the sparky silencer cheap if you want it, its brand
new, as far as i know ,only one guy on here said the Aaen sparky silencer was too restrictive.
the 3 inch one is much cheaper and looks alot better anyways, imo.

Deebo · « **Reply #8 on:** April 30, 2013, 01:46:39 pm »

I'm not sure if they offer the larger can style silencer anymore. I could be wrong though

Dezsled · « **Reply #9 on:** April 30, 2013, 04:10:05 pm »

Man those are some burly mounting brackets on that first silencer!

Dirtzilla · « **Reply #10 on:** April 30, 2013, 05:17:43 pm »

Yeah the mounting tabs broke after a few rough rides, i
Took it to a welding shop and said can you put some gussets to beef it up
that's what i got, lol
It will never break again

BadMoonRacing500 · « **Reply #11 on:** April 30, 2013, 07:42:11 pm »

There has been many people that have found the sparky silencer to restrictive including JH. That was a Joe Rock wanting bling silencer.

Dirtzilla · « **Reply #12 on:** April 30, 2013, 08:52:30 pm »

Worse part about it is they don't come polished or ceramic coated like the pipes do , lol

BadMoonRacing500 · « **Reply #13 on:** April 30, 2013, 09:07:01 pm »

Quote from: Dirtzilla on April 30, 2013, 08:52:30 pm

Worse part about it is they don't come polished or ceramic coated like the pipes do , lol

They will ceramic coat them if you wan't inside and out. I personally don't like ceramic on a 2 stroke pipe. It holds a lot of unwanted heat in the pipe. I like plain, with a good seasoning of atf on it, or chrome/nickel plate. I have the First new style AAEN pipe ever made. it's a hybrid pipe, my frame is the one the jig was built from. The zilla pipe came later and was built off a tweaked chassis, hence the fitment issue with the zilla pipe. Joe Rock wanted a shiny, big sparky silencer for SL and thats where the 2nd silencer version came from.

Dirtzilla · « **Reply #14 on:** April 30, 2013, 10:16:47 pm »

well since you just got a new Aaen,how about you buy that sparky for a special price and see how it works, LOL

just kidding,
last summer when i checked, they were selling those for $ 150,ouch.!!
the 3 inch silencer was $ 70 i think,

Dirtzilla · « **Reply #15 on:** April 30, 2013, 10:31:25 pm »

my Aaen is ceramic coated, i bought it 2 years ago, i was not aware of the heat retention factor back then. It still looks like new tho, i really like the look of the ceramic, not to blingy.

BadMoonRacing500 · « **Reply #16 on:** April 30, 2013, 11:18:34 pm »

Quote from: Dirtzilla on April 30, 2013, 10:16:47 pm

well since you just got a new Aaen,how about you buy that sparky for a special price and see how it works

It's not a new pipe

It is the first Q style AAEN pipe ever made, it's about 3 years old. As for the sparky silencer from AAEN..... Junk...

Dirtzilla · « **Reply #17 on:** April 30, 2013, 11:39:09 pm »

then you should of said (NEWER) not new style Aaen pipe,

BadMoonRacing500 · « **Reply #18 on:** May 01, 2013, 12:36:34 am »

There is 2 styles of AAEN pipes, there old dirt track 250 and 500 pipes, and the new style pipes, modified from ****, junk Q pipes, RK wouldn't fix the problems, So Bell, Dave, CR and Fred did. I have the first F*ck you Q part ever made

Mitch Keller · « **Reply #19 on:** May 01, 2013, 07:27:57 am »

Really anything you bolt on Either AAEN, Q V1 or V2 and the HPR19, yeah Ill plug the DCS-5, will be a warp drive jump over a FMF, Bills, CT, Trinity exhaust system, pick what you want for the performance you want and affordability.

Arkzilla · « **Reply #20 on:** May 01, 2013, 08:00:13 am »

I have the pipe really like it but hate the silencer that came with it way to big. Wish i could find a q silencer to connect to it or something better.

Dirtzilla · « **Reply #21 on:** May 01, 2013, 09:00:04 am »

Quote from: Arkzilla on May 01, 2013, 08:00:13 am

I have the pipe really like it but hate the silencer that came with it way to big. Wish i could find a q silencer to connect to it or something better.

Maybe Matt Shearer could sell you just a silencer, u have the 3 inch silencer or sparky silencer

Arkzilla · « **Reply #22 on:** May 02, 2013, 10:02:38 am »

I have the sparky its huge. Doesn't sound bad just don't like it.

Dragzilla346 · « **Reply #23 on:** May 02, 2013, 10:44:10 am »

Quote from: Mitch Keller on May 01, 2013, 07:27:57 am

Really anything you bolt on Either AAEN, Q V1 or V2 and the HPR19, yeah Ill plug the DCS-5, will be a warp drive jump over a FMF, Bills, CT, Trinity exhaust system, pick what you want for the performance you want and affordability.

yea thats what ive been reading, hoping its a good improvement over a PTR

Arkzilla · « **Reply #24 on:** May 02, 2013, 11:42:17 am »

I would like to find a Q silencer to put on it if i can get it to fit.

News:

Author Topic: About To Buy A AAEN Pipe, Which Silencer Should I Get?? (Read 1556 times)

Suzuki Quadracer HQ Store Zone