What Is The Stock Carburator Size ?

• What Is The Stock Carburator Size ?
  Posted by Quadracer250r on 07 Feb, 2013 05:59
• 36mm?
• 
  
• #1 Reply
  Posted by LT500Kid on 07 Feb, 2013 06:01
• 34mm on 250's
• 
  
• #2 Reply
  Posted by Quadracer250r on 07 Feb, 2013 06:27
• will a 36mm fit ?
• 
  
• #3 Reply
  Posted by GrkGuy on 07 Feb, 2013 07:44
• put a 38mm on it, a stock zilla carb will work fine on a 250
• 
  
• #4 Reply
  Posted by Iceracer on 07 Feb, 2013 08:22
• 85-86 = 32mm
  87-92 = 34mm
  36 is same od as a 32-34, a 38 will fit with some persuasion.
• 
  
• #5 Reply
  Posted by Twinzilla on 07 Feb, 2013 13:15
• I have a 34mm round slide Mikuni....would that be a stock 87-92 250 carb?
• 
  
• #6 Reply
  Posted by SBLT500R on 07 Feb, 2013 16:42
• all lt250's came with a flat slide mikuni.  that might be a tecate carb
  
  the 85-86 can't really go bigger than a 36mm.  the cases hit the carb.  could probably do it but be tight fit.  also wouldn't make sense as the carb bore would be larger than the intake.  need to open the intake up. 
• 
  
• #7 Reply
  Posted by Quadracer250r on 10 Feb, 2013 10:42
• i have a 90 im putting a 36mm flatside mikuni
• 
  
• #8 Reply
  Posted by Rainman56 on 10 Feb, 2013 19:21
• Here are some basic specs if you need them in the future.
  
  http://www.suzukiquadracerhq.com/chassis-suspension-17/lt250-details-and-specs/
•