What have you done to your Lt250 today?

• #25 Reply
  Posted by Motoman991 on 08 Nov, 2016 16:33
• I finally got a swing arm skid plate that I am probably going to install tonight if I can find the correct size bolts.  I left it parked in my father's garage and the dumbass bent the **** out of the rear brake rotor putting his engine hoist between the sprocket and the rotor. 
• 
  
• #26 Reply
  Posted by All American on 11 Nov, 2016 04:06
• I chained all my four wheelers together and then padlocked em down to the buildings' wall!! Lol. And I spent the night looking at 85 & 86 LT230Es' optional equipment from the factory.  I bought an accessory power cord that clips into a harness next to the battery, 12 volts & 10 Amps max!  I also found a backup buzzer that I may be able to install on my 87' 230.  I'm planning on adding lights mounted to my rear rack facing all different directions.  And I believe I have found a front rack for my 87' LT230E!!!!!!  They are effing hard to find but I believe I found one for around $70.00
 Dislike x 1  View List
• 
  
• #27 Reply
  Posted by 92lt250wannabe on 11 Nov, 2016 15:02
• ive got some purdy new parts for the ice quad recently. things are going back together pretty quickly. waiting on some other parts but it should be rolling around the garage this weekend. i will post pictures when that happens.
 Dislike x 1  View List
• 
  
• #28 Reply
  Posted by All American on 17 Nov, 2016 01:43
• My god dang goat ate my 85's 250 rear taillight wiring!  It was a brand new tail light!  Never even been light up once!  So I sold my 3 goats!!  NO joke!!!  I'm so pissed
 Dislike x 1  View List
• 
  
• #29 Reply
  Posted by All American on 28 Nov, 2016 13:16
• I may have just figured out a way to share a pic of my 85' 250...
  She may not be as glamorous as other 85's but it's very solid and a labor of love for me, my brother, & dad.
  Everything in the motor is new, I actually found a low profile rear fender, FMF, rear cooler rack, all new suspension bearings... seals... buffers...slides, New Nissin rear rotor,  topped off with a star spangled seat cover...
  
  And I just now realized that the pictures I posted on Facebook of mine, is actually my wife's Facebook account... which is set to private....  I'll try to post them to my Facebook... 1 minute!!! 
  
  https://m.facebook.com/nick.kimmel.92/posts/pcb.233019733797590/?photo_id=233019697130927&mds=%2Fphotos%2Fviewer%2F%3Fphotoset_token%3Dpcb.233019733797590%26photo%3D233019697130927%26profileid%3D100012686945819%26source%3D49%26refid%3D17%26ref%3Dbookmarks%26cached_data%3Dfalse%26ftid%3Du_8_1m&mdf=1
  
  I hope it works finally
  
  
  
  
 Dislike x 1  View List
• 
  
• #30 Reply
  Posted by Andys92 on 09 Mar, 2017 17:48
• Got some new covers for the queen today
  
  Sent from my LG-K425 using Tapatalk
  
  
• 
  
• #31 Reply
  Posted by Andys92 on 27 May, 2017 14:53
• What have I done today..Took my lsr 250 completely apart today to get ready for blasting and checked out the engine after 10 years of sitting.Pleasantly surprised.
  
  Sent from my LG-K425 using Tapatalk
  
  
 Like x 1  View List
• 
  
• #32 Reply
  Posted by DemonQuad666 on 03 Dec, 2017 18:05
•  Day 2 of Tear down.
  Removed Nerfs Will redye netting when I make up my mind on color scheme...
   Removed Junk Thumb Throttle and cable. Last thing I need for Carb that was just dangling by cable...
  Unboxed Motor and discovered serious problem with sprocket guard bolt holes.
  Inspected all top side components. Most of which are going in the trash. H-Bars are junk. Control levers Junk.Radiator Junk. Wiring Harness Junk.Half a tank of spoiled premix in the tank. JUNK!!!!! about the only thing worth a turd is the DG front Bumper and fresh rebuilt Suspension.
  Spent a lot of time looking at Motor and referencing Repair Manuel.
  Organized and Inventoried all my new parts that i pre ordered. Bolt kits Break pads clutch cable ect. ect... and started a list of all components that will be going to Powder coat with Chassis 
   I also Cussed a lot drank a few beers and some what organized tools.
  Not to bad for 2nd Day
  
• 
  
• #33 Reply
  Posted by Gillio on 04 Dec, 2017 19:29
• I pulled my borrowed linkage off my borrowed swingarm to send back to Andy. Thanks again Bud. I'll get my own parts someday.
• 
  
• #34 Reply
  Posted by Andys92 on 09 Dec, 2017 13:34
• Quote from: Gillio on 04 Dec, 2017 19:29

  I pulled my borrowed linkage off my borrowed swingarm to send back to Andy. Thanks again Bud. I'll get my own parts someday.
  

  You welcome.If I'm not using them you can borrow them.
  Today I bought some red carbon fiber plastic.I personally have never seen red carbon before so had to have them
  
  Sent from my SM-G892A using Tapatalk
  
  
• 
  
• #35 Reply
  Posted by Andys92 on 09 Dec, 2017 15:55
• Quote from: Andys92 on 09 Dec, 2017 13:34

  Quote from: Gillio on 04 Dec, 2017 19:29

  I pulled my borrowed linkage off my borrowed swingarm to send back to Andy. Thanks again Bud. I'll get my own parts someday.
  

  You welcome.If I'm not using them you can borrow them.
  Today I bought some red carbon fiber plastic.I personally have never seen red carbon before so had to have them
  
  Sent from my SM-G892A using Tapatalk
  

  Plastics
  
  Sent from my SM-G892A using Tapatalk
  
  
• 
  
• #36 Reply
  Posted by Pincoin on 10 Dec, 2017 03:10
• Quote from: Andys92 on 09 Mar, 2017 17:48

  Got some new covers for the queen today
  
  Sent from my LG-K425 using Tapatalk
  

  
  Where did you get these covers from?
• 
  
• #37 Reply
  Posted by Andys92 on 10 Dec, 2017 07:22
• Quote from: Pincoin on 10 Dec, 2017 03:10

  Quote from: Andys92 on 09 Mar, 2017 17:48

  Got some new covers for the queen today
  
  Sent from my LG-K425 using Tapatalk
  

  
  Where did you get these covers from?
  

  Company called cosmic quads
  
  Sent from my SM-G892A using Tapatalk
  
  
• 
  
• #38 Reply
  Posted by El Diablo on 17 Dec, 2017 19:15
• Andy, I'm liking that red carbon fiber look.
• 
  
• #39 Reply
  Posted by Andys92 on 17 Dec, 2017 21:30
• Thank you.Only a few sets ever made according to Maier and they had forgot they even made them.These will go on the lonestar
• 
  
• #40 Reply
  Posted by Motoman991 on 19 Dec, 2017 10:33
• That's going to be one nice Quadracer when it's done!
• 
  
• #41 Reply
  Posted by Andys92 on 20 Dec, 2017 06:43
• Hybrid is turning out ok.Its a struggle .
  Lonestar is what the extra money will go on
• 
  
• #42 Reply
  Posted by Motoman991 on 04 Jan, 2018 13:46
• Finally got the balljoints needed to mount the 400ex spindles and hubs.  The OEM uppers will work.  The lower balljoints need to be for a 400ex that fits aftermarket a-arms, because the OEM 400ex lower won't work.  Now I just need to find a set of wheels.
• 
  
• #43 Reply
  Posted by Rainman56 on 05 Jan, 2018 07:55
• Mines been sitting in storage since September/October and will stay there until the snow is gone lol
• 
  
• #44 Reply
  Posted by All American on 24 Jan, 2018 16:51
• I dusted mine off........ just waiting for some jingle jingle to get parts.
• 
  
• #45 Reply
  Posted by Andys92 on 25 Feb, 2018 16:55
• Started mock up of the outlaw
  
  Sent from my SM-G892A using Tapatalk
  
  
• 
  
• #46 Reply
  Posted by Gillio on 05 Mar, 2018 20:39
• I love that Outlaw!! You're developing quite a hoarding problem these days. Ill help you out and take this one off your hands.
• 
  
• #47 Reply
  Posted by Gillio on 05 Mar, 2018 20:41
• Probably the last thing I did to my 250 was this new seat. I love it. Surprisingly it was for sale for a while on FB before I bought it.
  
• 
  
• #48 Reply
  Posted by Canada on 06 Mar, 2018 00:40
• Very nice quads guys!
• 
  
• #49 Reply
  Posted by Rainman56 on 19 Mar, 2018 18:13
• I walked past my 250 today...That's about it.Snow is almost all gone.Few more sunny days above freezing and I may have to fire it up.
•