Finally got it back from powder coat and started re-assembly.  I am using yfz450 front shocks and a ltz400 rear shock. I am a pretty good size guy, so I figured these would be a good fit, or at least to try them. The stock ones were blown.  I have installed all new bearings, tie rod ends, ball joints, camber shims, and have done the bump steer mod.  I figured if it was apart, why not?

I picked up a durablue 2+2 rear and have both trx 450r rear hubs so I can use the sand tires off my ltz400 and the stock 5 bolt rear hub.

I am getting excited to get this all together so I can ride it. I recovered the  rear seat and am hoping to get a new set of plastics for it. I polished up my Q pipe and silencer, wheels, and had the motor bead blasted so it is a nice silver color.

Almost.......brrrrrrrrrrappppppppppp!