+-

Author Topic: Piston is hitting head on new rebuild help please  (Read 12004 times)

Offline MotorGeek - Jerry Hall

  • Trade Count: (0)
  • Pro Member
  • ********
  • Posts: 858
Had a friend come by and check this motor out for me me is a 2 stroke guy he took some measure ments  he said that with the cly has to come up about .80 to make it stop hitting the head that's about 4 base gaskits is that ok don't sound ok to me




.80 mm is about 1 1/2 base gaskets.  .080 inches is about 4 base gaskets. 

What did your engine builder do to your engine when he worked on it.  Why would he machine the head gasket surface or base gasket surface that much?

Did he put a stroker crank in it?



I asked  him he said my port timing should be dead on I called cometic they said they could make me a spacer in stead stacking gaskits


I think I smell a rat.



Talk to your builder and find out what he did to your engine and WHY     !!!!!!!!!




I

 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store