I am new to Suzuki Quads need info and help I am rebuilding the engine. But the right side of the crankcase is bad I need a new one what other year quadracer parts will fit on a 1989 Lt250r Quadracer.
87-92 quadracers have the same style cases. so any of those years will work for you. im pretty sure i have a good right side if you need one. ill check and get back to you.
Thanks 92LTDemon for the info let me know if you find the case half. Next question does that year range of 87-92 also go for other parts? or is that just case half's only. I would like to talk you more I have lots to ask maybe over the phone? Thanks for the reply.
No problem. unfortunately i dont have any good right side cases i have 2 left sides that are good. go figure. as far as parts interchangeablity it basically goes like this 85-86 are the same 87-90 are the same except for cylinders 87 has a big reed intake and then theres the 91-92 which are the same. the motors are the same from 87-92 except for the 87 having the big reed intake but they can still be used on any bottom end from 87-92. now if i can remeber correctly i believe the 87 LT 250R bottom ends had slghtly different gearing then the other years but im not 100% on that. A arms, front shocks, brakes and a few other misc parts are also interchangeable through out all years 87-92 and maybe 85-86 but not sure ive never really messed with the 85-86 years so i cant say for sure on those. anyway hope this helps
Thanks again 92LTDemon you have been very helpful this info should speed up my rebuild now I know what to look for. One more thing you wouldn't happen to have the clutch cover for that right side would yea? Do the 87-92 years also work for the rear swing arm as well.
92LTDemon I found the right side crankcase and clutch cover here in Michigan also they have whats left of a 92 sitting there.
the 87-90 have the same swing arm the 91-92 are different and will not work on the 87-90. glad i can be of assistance. theres also a good thread all about the LT 250Rs in the LT 250R chasis section that will break all the details down better for you its called details and specs i believe