Author Topic: Broken Power Valve Actuator (Read 1020 times)

Sdunlimited · « **Reply #25 on:** September 15, 2013, 07:58:20 am »

Hey Guys - I just had a few mins to go a pull a compression number off this thing and the high number I got was ~153psi. That's at WOT, 5 kicks. It seemed to go up the harder I kicked.

Isn't that a little low? Do you think it'll fire at this psi?

Thanks~

Chuckie25 · « **Reply #26 on:** September 15, 2013, 08:15:27 am »

It should definitely run at 153psi. Is that a fresh bore, piston and rings?

Sdunlimited · « **Reply #27 on:** September 15, 2013, 08:17:57 am »

Thanks - it's a 'recent' bore, piston & rings. It's got some time on it but was running previously. Running out now but will get some fuel in this pig this afternoon and see what happens

Sdunlimited · « **Reply #28 on:** September 15, 2013, 01:55:42 pm »

She Runs!!!

But there's a few problems outlined here: http://www.suzukiquadracerhq.com/lt250/88-lt250r-runs-but-not-well-multiple-problem-diagnosis/

Rider414 · « **Reply #29 on:** September 15, 2013, 02:21:27 pm »

The Quadracer gods were happy today!!!

News:

Author Topic: Broken Power Valve Actuator (Read 1020 times)

Sdunlimited

Re: Broken Power Valve Actuator

Chuckie25

Re: Broken Power Valve Actuator

Sdunlimited

Re: Broken Power Valve Actuator

Sdunlimited

Re: Broken Power Valve Actuator

Rider414

Re: Broken Power Valve Actuator

Suzuki Quadracer HQ Store Zone