Author Topic: WTB: Rear Axle Washer/Chain Guide (Small One) and Motor Mount Hardware (Read 305 times)

Rider414 · « **on:** July 07, 2013, 08:43:17 am »

I need the upper small axle washer. The one that is used for the chain alignment. This part is no longer available. If you have one laying around - that would be great.

I also need the bolt, nut, and spacers for the front motor mount.

http://www.cheapcycleparts.com/oem-parts/suzuki/1987/lt500r-quad-racer-500-h/crankcase

17, 14, 15, and 12

If you have any of this misc. stuff laying around let me know.

PCS · « **Reply #1 on:** July 07, 2013, 01:28:19 pm »

are you referring to the plate that goes under the head of the 2 bolts that you use to align the axle when tightening the chain?

Rider414 · « **Reply #2 on:** July 07, 2013, 02:22:02 pm »

Yes - exactly.

PCS · « **Reply #3 on:** July 08, 2013, 01:18:46 pm »

let me dig in my parts box for it. if you can message me at 928 446 2339 if i find it ill send you pics just to make sure.

PCS · « **Reply #4 on:** July 09, 2013, 02:44:49 am »

Found them but message my phone just to make sure, i also have 2 of the carrier bolts

News:

Author Topic: WTB: Rear Axle Washer/Chain Guide (Small One) and Motor Mount Hardware (Read 305 times)

Rider414

WTB: Rear Axle Washer/Chain Guide (Small One) and Motor Mount Hardware

PCS

Re: WTB: Rear Axle Washer/Chain Guide (Small One) and Motor Mount Hardware

Rider414

Re: WTB: Rear Axle Washer/Chain Guide (Small One) and Motor Mount Hardware

PCS

Re: WTB: Rear Axle Washer/Chain Guide (Small One) and Motor Mount Hardware

PCS

Re: WTB: Rear Axle Washer/Chain Guide (Small One) and Motor Mount Hardware

Suzuki Quadracer HQ Store Zone