I have a swing arm and carrier. I could sell the carrier, but not the swingarm yet. I'm hoping my company sends me to the fab shop after the job I'm on is finished so I can weld the swingarm and press new bearings in it. Once that's done I'd sell it to a member pretty cheap. I had the carrier on fleBay for a bit, no bites. Its got new bearings in it. I made a bearing spacer so I could change axles quicker. It's got a slightly larger I.D. Than the original spacer, so I cut the original spacer off both of my axles to be able to change them from my rad carrier to the stocker and vise versa. It works good. The bad is, the lip that holds the brake arm snap ring has some chips, still holds the ring fine. Also one of the chain tensioner bolt holes had been drilled and tapped by the previous owner. It looks like about 1/2". The bearings are brand new NMD bearings double sealed. The whole inside has Lucas Mucus in it. It's in a plastic bag waiting to be needed. I'd sell the carrier to you for $45 plus shipping it would comewith the spacer and bearings in it. I've decided I'm going to buy another RAD carrier for my next build. Also I'm building a Steel or chrome alloy swingarm for my next one too. If you send me your email address, I can send pics. BTW my email is public here, you can get it at my profile page. If you got the cash tho, I'd recommend the rad carrier. It's really nice.