Author Topic: Need a front brake master cylinder and lever (Read 377 times)

Buckeye513 · « **on:** June 21, 2013, 11:05:13 am »

So didn't notice this till I went to flush the brake lines and bleed them last night. The screws on the cap of my master cylinder are completely round like drill holes. No way to get the cap off other than drilling them out. Not sure I wanna do that so seeing if anyone has a front master cylinder/lever assembly they'd part with. Let me know thanks!!

Dezsled · « **Reply #1 on:** June 21, 2013, 11:15:39 am »

You might wanna look into a z400 front master cyl. Better choices for a aftermarket lever. The oem master cyl has few choices.

cworobec · « **Reply #2 on:** June 21, 2013, 11:40:53 am »

If you want an oem master cylinder and lever, I have some. Let me know what you wanna pay for it.

Buckeye513 · « **Reply #3 on:** June 21, 2013, 11:52:52 am »

I was looking on eBay for a ltz400 setup Dez couldn't find any in decent shape for what I have to spend. Looking to spend $20-$30 and I don't need the lever if its OEM. Or if anyone has a z400 setup I'd be interested in that too.