Author Topic: Parts bin clean out for 250 (Read 2572 times)

All American · « **Reply #75 on:** October 29, 2013, 05:21:33 pm »

I'll go look and see what I have

All American · « **Reply #76 on:** October 29, 2013, 05:28:47 pm »

Got both.

Chuckie25 · « **Reply #77 on:** October 29, 2013, 05:53:05 pm »

How's it look after a good spray? If theres still some crusties on it maybe hit them with a handheld wire brush to get them to loosen up?

All American · « **Reply #78 on:** October 29, 2013, 05:55:34 pm »

This is what it looks like after I squirted both cans over them, grabbed this brush and lightly scrubbed it. Wiped it of with a paper towel. There is still stuff on there so my wife's up at the store buying more cleaner for us.i can scratch off the black crud on the inside of the little fingers that stick out. Going to the garage for better brush.

Chuckie25 · « **Reply #79 on:** October 29, 2013, 06:01:42 pm »

It's definitely getting there to being a good usable basket after some filing on the fingers.

All American · « **Reply #80 on:** October 29, 2013, 06:07:41 pm »

What exactly do people shave? And the fingers, are they the pointy things sticking out?should I go ahead and mail it then?

Chuckie25 · « **Reply #81 on:** October 29, 2013, 06:36:08 pm »

the things that the clutch friction disks fit into. theyve got some grooves in them from the disks mashing against them which will make the clutch not fully disengage (they will still grab some). You just take and file away the grooves and walla

Dangerouspower · « **Reply #82 on:** October 29, 2013, 07:07:38 pm »

Wow im impressed how well that broke that rust down.

All American · « **Reply #83 on:** October 29, 2013, 09:10:29 pm »

I used both cans of cleaner again. Mind you I could not find a stiff brush anywhere and my toothbrush wasn't going to get sacrificed. Lol here it is.

All American · « **Reply #84 on:** October 30, 2013, 09:15:10 am »

We never did get clarification as to what year it's from though. Anybody know?

Dangerouspower · « **Reply #85 on:** October 30, 2013, 11:52:47 am »

Pretty sure its a 85-86.

All American · « **Reply #86 on:** October 30, 2013, 11:57:38 am »

Really! I wouldn't have listed it for sale since I'm pretty sure the clutch assembly in my 86' is bad. Lol go figure.oh well, I'm not going to rebuild it for a while anyways I guess. So if anybody still wants it, just let me know.

Dangerouspower · « **Reply #87 on:** October 30, 2013, 02:40:34 pm »

You should just keep it! Its not like there a high dollar part you will make a lot of money off of.

All American · « **Reply #88 on:** October 30, 2013, 07:30:49 pm »

Yeah, but when I rebuild my 86' I want all new stuff in it, so I think it should find a good home. I have probably $15 in cleaner. If you pay for that and shipping, it's yours.

All American · « **Reply #89 on:** October 31, 2013, 12:14:40 pm »

Chuckie25 I've tried sending you at least three messages and about the front shocks and rear spring. For some reason it's not sending cause it won't show up in my sent folder. If you still want them I can make a good deal on them, especially since they may need rebuilt. If you've got a number in your head just throw it out there. And give me your address. After you get it you can make payment.

Thanks guys, and DP I sent you a message about a pipe you said you were needing. Just let me know and I will pull it off either of my 250's. Same thing as above, address, shipping plus parts. I'm in 63501 if somebody wants to look up shipping. I couldn't figure it out on my computer. Lol not the most proficient with electronics.

Chuckie25 · « **Reply #90 on:** October 31, 2013, 12:32:34 pm »

Quote from: All American on October 31, 2013, 12:14:40 pm

Chuckie25 I've tried sending you at least three messages and about the front shocks and rear spring. For some reason it's not sending cause it won't show up in my sent folder. If you still want them I can make a good deal on them, especially since they may need rebuilt. If you've got a number in your head just throw it out there. And give me your address. After you get it you can make payment.

Thanks guys, and DP I sent you a message about a pipe you said you were needing. Just let me know and I will pull it off either of my 250's. Same thing as above, address, shipping plus parts. I'm in 63501 if somebody wants to look up shipping. I couldn't figure it out on my computer. Lol not the most proficient with electronics.

I keep getting your messages as emails lol. I replied to your last email

All American · « **Reply #91 on:** October 31, 2013, 01:10:25 pm »

I got your email chuckie. DP I'll get that exhaust mailed out.

GrkGuy · « **Reply #92 on:** October 31, 2013, 02:46:54 pm »

your box may be full, might need to empty some messages

All American · « **Reply #93 on:** October 31, 2013, 03:09:41 pm »

I have 20 messages in my inbox. Is that the limit?

All American · « **Reply #94 on:** October 31, 2013, 03:10:22 pm »

I mean in my sent folder.

All American · « **Reply #95 on:** October 31, 2013, 03:25:15 pm »

13.robb, I can't seem to find your address. Can you message or email it please thanks. I've got DP exhaust loaded up in the van along with sad makers sprocket cover, heel guards to my fellow Missourian up north! I just need 13robbs address and we are all set.

Ps dangerous power was you going to be using this pipe for the dyno runs on 250 pipes? If so I just wanted to warn you there were a couple little dings in it I just noticed when I was loading it up. 1 was very small, and the other one looks like the frame may have caused the ding. I just want to make sure you guys get all the info possible so no one feels cheated when they get their stuff. If there's any issues with parts, just let me know and it'll get corrected.

All American · « **Reply #96 on:** October 31, 2013, 03:32:03 pm »

Chunky 25 was wanting to know more about this blue rear spring. Can anyone tell us something about it? I.e manufacturer etc. I'll post up pics of it measured with a tape measure if it helps.

All American · « **Reply #97 on:** October 31, 2013, 03:55:40 pm »

Dangerouspower · « **Reply #98 on:** October 31, 2013, 05:35:10 pm »

She will be part of the pipe testing, and well get those dings blown out.
Thanks again!

All American · « **Reply #99 on:** October 31, 2013, 07:07:40 pm »

Ok, so I got everybody's info rounded up and stuff is in the van. Once I get this stuff mailed out tomorrow, I'll begin listing more stuff again. I heard a rumor there may be a **** swingarm for sale. Not sure which swingarm I'm keeping but one will probably go for sure. Oh that reminds me, I wanted to ask you guys if an 88' swinger will mount up to an 86'. I still have all the parts for both four wheelers and am hoping to upgrade my 86' to the 88' style. Can it be done?

News:

Author Topic: Parts bin clean out for 250 (Read 2572 times)

Suzuki Quadracer HQ Store Zone