Another LT500R Part-Out (or whole)!

Another LT500R Part-Out (or whole)!
Posted by Twinzilla on 15 May, 2014 10:30
I’m bailing on another LT500 project, no worries though, this was never a complete quad (since I’ve owned it). It consists of parts I’ve collected over the years and I’d say it’s about 90% complete. I basically have everything except the plastic and seat to put it together. Here is a list of some parts and prices (if you don’t see something you need, let me know and I’ll see if I have it):

87 motor – complete but needs rebuild (crank moves up and down). Cases are in good shape with case saver bosses still intact, only blem is two little chunks taken out where the stator cover mounts. Cylinder is an 87.5 mm big reed in good shape, no cracks or repairs, needs a bore or hone possibly. $750 (includes everything, cylinder, head, power valve, reeds, intake, clutch & stator covers, etc.). I will part this out if you just want the top end, bottom end, trans, cases etc. Pm me for piece part prices.

87 Frame – nice straight frame, a couple repairs and buggered up holes but price reflects that. $175

87 A-arms – complete with ball joints, etc. Need paint. $80

Nice 88-90 swingarm – no cracks or repairs ever, excellent original condition. $100

Front shocks – good useable shape, springs could use paint. $75

Front wheels/tires – reinforced ITP .190’s with Mohawk tires. $100

Rear wheels – 8X9” Douglas Blue Labels. $75

Foot pegs – straight, need paint. $40

Bills pipe with Answer aluminum silencer – pipe needs paint, silencer and stinger made completely of aluminum. $100

Wiring harness with electronics – mostly complete. $100

Front/rear hubs – good shape. $50 for fronts, $35 for rears

Axle – stock in nice shape, straight. $100

Shifter – nice. $30

Brake lever – nice. $25

Steering stem – minor tweak, could be repaired. $25

Renthal fat bars with clamps – nice shape. $60

Gas tank – nice shape with petcock. $65

Airbox – nice shape, with lid. $50

Radiator – good shape, some crushed fins but no leaks. $50

Stock rad hoses – nice. $25

Stock swingarm skid – nice. $35

Other misc parts make offer...or buy everything for $1500

#1 Reply
Posted by Kreidy818 on 15 May, 2014 11:00
Location ??

#2 Reply
Posted by Twinzilla on 15 May, 2014 12:00
Binghamton area of NY, I could meet you in Cobleskill again if you're still working in NY

#3 Reply
Posted by Warmeck on 16 May, 2014 21:07
how much for %90 complete quad?

#4 Reply
Posted by Twinzilla on 17 May, 2014 05:42
$1500 best offer

#5 Reply
Posted by Twinzilla on 18 May, 2014 07:30
Ok looks like it's getting parted, frame & cases sold. Here are some prices on the engine parts, I'll start tearing it apart today. If I don't list something you need pm me & I'll shoot you a price.

Cylinder - $250 (with head & power valve $350)
Trans - $150
Crank assembly - $100
Clutch basket - $100
Clutch assembly (minus basket) - $75
Clutch cover w/water pump - $100
Stator cover - $35
Shift shaft - $45
Intake - $30
Reed cage - $25

#6 Reply
Posted by Twinzilla on 15 Jun, 2014 19:30
Bump, still have a lot of the this stuff left...

#7 Reply
Posted by Rossy on 04 Jul, 2014 14:20
Do you still have the shift shaft? I'll be in New Haven on the 5th and 6th.

#8 Reply
Posted by LRDLT265 on 23 Jul, 2014 16:41
Can you post pics of the bills pipe?

#9 Reply
Posted by MeanGreen on 13 Aug, 2014 22:37
Still have front wheels and tires? Also, I need the two seals/guides that go in your stem clamp, plastic guard behind radiator, perhaps some other odds and ends.