Author Topic: Honda Leager A arms (Read 1288 times)

Dezsled · « **Reply #25 on:** December 13, 2013, 09:33:55 am »

You might try z400 spindles/hubs/brake discs.... Lighter, rims easier to find 4x144, you can use yfz450 dual piston brake calipers

On my Zilla they reduce bump steer

Serg500 · « **Reply #26 on:** December 13, 2013, 09:56:47 am »

You posted that pic do you think I can use z400 spindles

Dezsled · « **Reply #27 on:** December 13, 2013, 10:23:53 am »

Getting the parts to work correctly might take some work, but I know a spindle swap can be done.

I went to suzuki central site and got used spindles hubs rotors yfz450 calipers steel lines off one member for $107

Serg500 · « **Reply #28 on:** December 13, 2013, 01:35:50 pm »

Cool thanks

ATVMXR · « **Reply #29 on:** December 13, 2013, 01:43:02 pm »

serg, is this the same laeger you had a couple years ago that you showed me in person? I dont remember the tie rods being in front like that. I would say thats pretty damn rare if so. the spindles in the pic look to be the TRX250r from 1986/1987. probably before leager developed T-pin spindles.

me personally, I wouldnt go f'ing around trying all sorts of spindle conversion - with those tie rods in the front like that who knows what would happen to the steering geometry. it shouldnt be too difficult to source some 86/87 TRX spindles, hubs, etc. let me know if you need help

Dezsled · « **Reply #30 on:** December 13, 2013, 06:50:40 pm »

Serg does your steering stem have the tie rod mount tab fore or aft /front or back on your stem?

That pic is from the late '80s when racers were looking for any latest trick to improve performance or handling..... Wonder why no one runs anything like that now?

Iceracer · « **Reply #31 on:** December 13, 2013, 08:17:27 pm »

Take one shot to the front side from a tire and your out of the race. It was a bad idea for track racing, zero protection.

Serg500 · « **Reply #32 on:** December 15, 2013, 08:57:27 pm »

ATVMXR yes this is that leager and the tie rods do mount in the front. So I'm probably stuck with this front end.

Dezsled the bump stop is on the other side I don't remember what side but I know it's different then my tl250.

Ice racer I was thinking the same about these tie rods being in the front.

Dezsled · « **Reply #33 on:** December 16, 2013, 07:02:16 am »

How about a pic of your front end?

Alkyzilla · « **Reply #34 on:** December 16, 2013, 07:05:40 am »

Quote from: Serg500 on December 15, 2013, 08:57:27 pm

ATVMXR yes this is that leager and the tie rods do mount in the front. So I'm probably stuck with this front end.

Dezsled the bump stop is on the other side I don't remember what side but I know it's different then my tl250.

Ice racer I was thinking the same about these tie rods being in the front.

Oh come on Serg..Racer........That just means you have to stay way out in front.

Serg500 · « **Reply #35 on:** December 16, 2013, 09:04:33 am »

Dezsled I don't have spindles or the tie rods on it, it's just like that pic you posted.

Alkyzilla that' Exactly what I expected to do but I need one of your motors and pipe....lol

Serg500 · « **Reply #36 on:** December 16, 2013, 10:39:42 am »

Here's some pics

Serg500 · « **Reply #37 on:** December 16, 2013, 10:40:36 am »

2 more

Dezsled · « **Reply #38 on:** December 16, 2013, 11:01:32 am »

Sweet front ends

Iceracer · « **Reply #39 on:** December 16, 2013, 12:02:15 pm »

Serge you just need to send it up here to me Ill sort it all out for ya. ....lol Ok seriously.
Does the steering stem have the pitman off the front and stop on the rear? That don't look Like reverse setup, not saying it isn't. Mount up the other side and lets see where the lines are you may be able to run a standard Honda stem. You will need Honda Spindles though. 400ex will work, there a really common swap in the R world.

Lets get this thing sorted out so you can ride it you been starring at it for what 3 years now?

Serg500 · « **Reply #40 on:** December 16, 2013, 12:46:25 pm »

It stem has it off the front I have the leager stem that came with it. I just need some spindles I have the tie rods also.

Dezsled · « **Reply #41 on:** December 16, 2013, 01:47:50 pm »

Here ya go

http://www.ebay.com/itm/TRX250R-OEM-FRONT-SPINDLES-TRX-250R-FOURTRAX-HONDA-1986-1987-86-87-GOLD-/121235713184?pt=Motors_ATV_Parts_Accessories&hash=item1c3a362ca0&vxp=mtr

Serg500 · « **Reply #42 on:** December 16, 2013, 04:01:34 pm »

That's but I'm thinking about running the 400ex spindles

Serg500 · « **Reply #43 on:** May 02, 2014, 03:13:31 pm »

i hate to bring this old post back up but a few of you guys told me these spindles on my leager are honda 250r spindles. if you look at a honda the tie rod is in the back and the pic that was posted from the magazine show the tie rod in the front.

Dezsled · « **Reply #44 on:** May 02, 2014, 04:52:32 pm »

The right spindle is mounted on the opposite side and vise versa in the pic I posted. I'd like to see the steering shaft with the flag/tie rod mounting tab off the front, can you post a pic serg? That would be a pretty rare part

Dezsled · « **Reply #45 on:** May 02, 2014, 05:01:07 pm »

On the '86-7 trx250r spindles the arm the tie rod end mounts to is lower than '88-9 trx250r and 400ex spindles. Something else to think about

Serg500 · « **Reply #46 on:** May 02, 2014, 06:13:42 pm »

did you see the pics i posted last time i was on here i don't know if it would help. i think I'm just going to buy some trx spindles and see what happens.

News:

Author Topic: Honda Leager A arms (Read 1288 times)

Suzuki Quadracer HQ Store Zone