FS- New V1 Q-pipe

• FS- New V1 Q-pipe
  Posted by CrazyJ789 on 16 Nov, 2012 11:44
• Hey guys got a V1 Q-pipe for sale.  Has only warm up cycles on it so it is still very brand new.  $500 + the ride.  PM or text 2193094892 if interested. Thanks, Jason
  
  
  
  
• 
  
• #1 Reply
  Posted by Tim_79 on 20 Nov, 2012 08:16
• THAT LOOKS OSOME still have and what would replace that!!
• 
  
• #2 Reply
  Posted by CrazyJ789 on 20 Nov, 2012 17:10
• Im going to replace it with a HPR #19 pipe
• 
  
• #3 Reply
  Posted by Deebo on 20 Nov, 2012 18:31
• Great deal on the pipe. Bump for a great seller as well.
• 
  
• #4 Reply
  Posted by Rainman56 on 20 Nov, 2012 19:54
• Where you located?
• 
  
• #5 Reply
  Posted by CrazyJ789 on 20 Nov, 2012 21:01
• Im located in Valparaiso, IN close to Chicago, IL
• 
  
• #6 Reply
  Posted by Rainman56 on 21 Nov, 2012 17:07
• Are you able to ship to Ontario Canada???Might be interested depending on the shipping cost.If your interested as far as shipping across the border let me know and I can send you my address info to check on a price.If not no worries.
• 
  
• #7 Reply
  Posted by Rider414 on 21 Nov, 2012 18:15
• You'll really like that pipe Rainman!!
• 
  
• #8 Reply
  Posted by Rainman56 on 22 Nov, 2012 11:28
• PM sent
• 
  
• #9 Reply
  Posted by CrazyJ789 on 22 Nov, 2012 14:12
• Q-Pipe SOLD....thanks guys
• 
  
• #10 Reply
  Posted by Rainman56 on 22 Nov, 2012 21:04
• Snooze I lose:(
• 
  
• #11 Reply
  Posted by Tim_79 on 13 Dec, 2012 21:01
• Just put pipe on today a differce is an under statement . And the sound O YA cant wait to do my motor now. Did you get your stock head machined? for squish or no saw that on your bike and if so does 15 degrees in dome and .015 off the gasket side?
• 
  
• #12 Reply
  Posted by Rainman56 on 13 Dec, 2012 22:08
• Quote from: Tim_79 on 13 Dec, 2012 21:01

  Just put pipe on today a differce is an under statement . And the sound O YA cant wait to do my motor now. Did you get your stock head machined? for squish or no saw that on your bike and if so does 15 degrees in dome and .015 off the gasket side?
  

  
  What pipe were ya running before?
• 
  
• #13 Reply
  Posted by Tim_79 on 14 Dec, 2012 06:17
• just picked up the bike a cuple of months ago all stock but not when iam done
• 
  
• #14 Reply
  Posted by GrkGuy on 14 Dec, 2012 07:27
• oh yeah that pipe is a huge improvment over stock, make sure to adjust the power valve correctly for the pipe.
  i like 1 1/8 turn ccw but i think they say 1 1/4
• 
  
• #15 Reply
  Posted by Rainman56 on 14 Dec, 2012 13:23
• 1.25 was what was being said but think I heard later 1.75 was the "sweet spot"?
• 
  
• #16 Reply
  Posted by Iceracer on 14 Dec, 2012 13:43
• There is no deffinate place to set it. You can start at 1 turn and experiment up to 1.75 to see where it works the best, the condition of all the components in the PV will determine opening and the best place to run it. ALso be sure the cylinder is properly warmed up as a cold cyl with oil residue will react diffrently than a hot one.   
• 
  
• #17 Reply
  Posted by Tim_79 on 14 Dec, 2012 14:41
• ILL do that thaks alot . what do you guys think about cool head or fix up stock head, ied like to stay stock bore for now with trail port
• 
  
• #18 Reply
  Posted by Deebo on 14 Dec, 2012 15:16
• Cool head and stock head both need to be modified. Depends on your wallet.
• 
  
• #19 Reply
  Posted by Tim_79 on 14 Dec, 2012 20:47
• ok nice does this sound right  .015 off gasket side with 15 degre dome to get .060 to .065 for stock head
• 
  
• #20 Reply
  Posted by Tim_79 on 14 Dec, 2012 21:17
• better yet where are some shop to send my motor i live in ottawa canada not alot of options here
•