Hey Guys. Been a while since I've been on here. Long story short, been busy with remodeling my house, my pups, family vacations and life in general.
I'm posting up both my 250's again along with my '87 500 motor and BNIB Q-pipe.
Most of you guys know the story behind my stuff. Had most of it forever and it's time to let it go to someone who can use it.
I haven't ridden my 250 in a long time. My wife and I mostly trail ride now and occasionally get to the dunes, but I stay on my 4 poke mostly. Just don't use the 2 strokes anymore.
I've listed this all before, but to be honest, the flamed wonder is getting a little grungy and worn. I used to go through it every year, but it's been about 2 years since I have done anything to it. It needs a good polishing. The flames are worn.
It likely needs a new crankshaft as I kept shearing the magneto woodruff key. I think the crankshaft groove is worn and allows the key to "rock" back and forth when I'm on and off the gas and that is what is chewing up the keys.
The 86 hasn't seen the dirt since I have started restoring it 2 years ago. It's clean and just needs a few parts to be complete.
1985 LT250R
Ive had this bike since 1994.
250cc with aggressive top end port
FMF gold series pipe and FMF turbine core silencer
Barnett clutch
Mikuni TM38 Flatslide carb
Billet Aluminum RPM tapered roller bearing rear carrier
RS Lighting coil
Laser star lights (1 50watt spot, 1 50 watt flood)
1986 LT250R
Nearly complete bike. needs the cylinder, piston/rings, a few top end gaskets and silencer.
Not pictured, but I have the radiator, gas tank, seat, hoses, carb, lights and plastic. The plastic is a little ragged though.
Here's all the extra's that go with.
Stock rear grab bar
(1) chrome and (1) black brake reservoir guard
(1) set of rear hubs
(1) stock coil
(1) Pro-design kill switch with tether
(1) rear brake stay
(1) stock emergency brake (clutch perch and rear brake pieces)
(2) cylinder heads
(1) throttle cable
(1) set of upper a-arms (left side is bent)
Graydon steel nerf bars
(1) brake lever
(1) clutch lever
(1) twist throttle
(1) set of front hubs
(1) set of front spindles
(1) rear brake light assy
(1) stock rear bearing carrier (no bearings)
(1) factory blue cap and hood
(1) factory black cap and hood
(1) 1989 LT250 left handlebar switch (engine-off/run) (lights-off/low/high)
(2) stock TM34 Mikuni carbs
(1) Keihin PJ carb (not sure of size)
(1) stock chrome headlight guard
(2) headlights
(2) sets of stock stick guards
(1) stock air box
(2) sets of rear wheel plates (came factory on 85s)
(3) rear sprockets (2) 42T, (1) 44T- The 85 has 39T and 86 has 42T
(1) rear brake disc
(1) set of footpegs
(1) stock clucth cover
(2) 85/86 LT250 bottom end half cases
(1) set of chrome front shock springs
(1) set of rear 10 douglas wheels
(1) set of rear 10 douglas wheels with Realtors mounted.
(1) stock swing arm (has crack at rear carrier and one near shock mount (fixable)
(1) stock chrome front fender brace
Plus a stock bore '87 500 motor. I have disassembled it and have all parts bagged up. Cases are good, has a small repair near the shifter, likely culprit with most LT's, someone before me lost a chain.
I also have a Brand new, never used Q-pipe V1, complete that is included.
Have all of the original paperwork, original service manual and brochures that came with the 1985 when new.
Probably more that I haven't listed.
I won't ship and I won't part out.
Please be local or willing to make arrangements to meet and pick up. I'd be willing to travel to a point.
PM me with questions.
I am asking $2800 for all of it. both bikes, motor, Q-pipe and all the parts.
Thanks for looking.....