Author Topic: 85 LT250R lost interest mid restoration (a lot of aftermarket parts) (Read 1114 times)

LTcoastieR · « **on:** December 30, 2014, 04:46:28 pm »

Hi all,

I bought my quad while stationed in Alaska and rode it until the wheels fell off. Literally, the left rear wheel passed me on a turn. I took it all apart and transferred to California. While I was there I sent a bunch of parts to get painted, bought some +2 a-arms and axle, custom swingarm, works shocks, fmf exhaust, ect. I got transferred to Maryland and picked up a car addiction instead.

I prefer to sell the entire setup as a whole, rather than sell bits and pieces and having shipping costs, ect.

*EDIT* Talked it over with the Mrs and I'll part this out, I'll probably get more for it this way any how. More pictures posted and a price list soon to follow. Don't be afraid to shoot me an offer. Keep in mind most of the parts are new, never installed, there for it doesn't justify a low-balled price.

**Price List for parts only, shipping is extra**
*Extended A-arms with tie rods (I believe is +2)- $100* - I'm not sure of the year, the 1985 bearing kit I bought from pivot works do not fit in these A-arms.

FMF full exhaust - $300
Metal tech swingarm (stock length)- $400
Works A-T dual rate front shocks - $450
Works A-T rear shock with rez - $650
Durablue Eliminator axle (I believe is +2) - $275
Renthal Bars/ Pro taper grips - $80
Skull seat/shock covers - $25
Silicone Radiator hoses - $25
Clutch - $25
Motor/trans (will not split) (ran/shifted great a few years ago) - $600 *Will not ship, but willing to meet*
Extra jug - $100
Reeds - $20
Brake pads front and rear - $20
American Star stock length 12mm tie rods - $60
Carb rebuild kit - $15
Pivot works front wheel bearings - $20
Pivot works rear wheel bearings - $20
Pivot works Linkage bearing kit - $75
All Balls ball joint set (4 total) (left&right, upper&lower) - $75
Pivot works Upper/lower A-arm bearing kits (2) - $100
6-Pack rack and 1 gallon gas can - $40

Any oem stuff I'll just ask you pay for shipping.

87zillaman · « **Reply #1 on:** December 30, 2014, 04:53:49 pm »

hey whats up man what you want for the shocks

Jon35 · « **Reply #2 on:** December 30, 2014, 07:37:00 pm »

most of the time it seems people on here will pay the shipping costs when they buy off here if that's your concern. If you do decide that parting out is the route your going to go I may be interested in your swing arm of it's extended and for the right price of course lol.

Comer1976 · « **Reply #3 on:** December 31, 2014, 04:21:00 am »

I'd be interested in the a-arms, and tie rods. How much you asking for the whole atv? if its the right price I might buy it and part it out myself as I think I could only use the a-arms for my 92.

Kreidy818 · « **Reply #4 on:** December 31, 2014, 04:58:13 am »

85/86 arms are different from 87 and up

Comer1976 · « **Reply #5 on:** December 31, 2014, 06:55:16 am »

Well guess thats out of the park then

So count me out. I should have known I couldn't get this lucky lol as so far I've found a hinson basket, and so v force reeds and only have $80 into both of them, then seen this add and was ready to buy the whole quad just for the a-arms as I am about 4 hours away from MD. But I didn't know they wouldn't fit as I thought the shocks were the only difference in the front. So glad you chimed in on this Kreidy818 before I wasted money and had to resale everything for nothing lol.

LTcoastieR · « **Reply #6 on:** December 31, 2014, 08:19:30 am »

LTcoastieR · « **Reply #7 on:** January 10, 2015, 05:40:29 pm »

Lets hear some offers!?!

PCS · « **Reply #8 on:** January 11, 2015, 09:05:03 pm »

nice collection of parts, good luck and free bump

LTcoastieR · « **Reply #9 on:** January 12, 2015, 02:17:39 pm »

Thank you for the bump PCS, and in honor of having such a good list of parts, I'll be dropping some prices. Why I can't edit the OP I have no idea....

*Extended A-arms with tie rods (I believe is +2)- $50* - I'm not sure of the year, the 1985 bearing kit I bought from pivot works do not fit in these A-arms.

FMF full exhaust - $250
Metal tech swingarm (stock length)- $300
Works A-T dual rate front shocks - $350
Works A-T rear shock with rez - $500
Durablue Eliminator axle (I believe is +2) - $200
Renthal Bars/ Pro taper grips - $40
Skull seat/shock covers - $20
Silicone Radiator hoses - $25
Clutch - $20
Motor/trans (will not split) (ran/shifted great a few years ago) - $500 *Will not ship, but willing to meet*
Extra jug - $50
Reeds - $10
Brake pads front and rear - $10
American Star stock length 12mm tie rods - $45
Carb rebuild kit - $10
Pivot works front wheel bearings - $10
Pivot works rear wheel bearings - $10
Pivot works Linkage bearing kit - $50
All Balls ball joint set (4 total) (left&right, upper&lower) - $50
Pivot works Upper/lower A-arm bearing kits (2) - $60
6-Pack rack and 1 gallon gas can - $25

Knock10090 · « **Reply #10 on:** January 17, 2015, 05:29:46 pm »

PM Sent!

LTcoastieR · « **Reply #11 on:** January 18, 2015, 05:19:05 am »

A-arms and axle - sales are pending

LTcoastieR · « **Reply #12 on:** January 19, 2015, 02:02:32 pm »

More Pictures! Also adding wheels and tires. I have the factory rears, bridgestone dirt diggers. Dry rot, but still hold air. Mounted on ITP rims. Make an offer.

Front and rear ITP holeshots mounted on ITP rims, like new. $150 for the set.

LTcoastieR · « **Reply #13 on:** January 21, 2015, 06:02:49 pm »

Updated parts list:

FMF full exhaust - $250
Durablue Eliminator axle (I believe is +2) - $200 (sale pending)
Renthal Bars/ Pro taper grips - $40
Skull seat/shock covers - $20
Motor/trans (will not split) (ran/shifted great a few years ago) - $500 *Will not ship, but willing to meet*
Extra jug - $50
Reeds - $10
All Balls ball joint set (4 total) (left&right, upper&lower) - $50
Pivot works Upper/lower A-arm bearing kits (2) - $60
6-Pack rack and 1 gallon gas can - $25
Like new Holeshot xc tires mounted on ITP rims - $150
Seat - $50
DC style font bumper - $40

Dangerouspower · « **Reply #14 on:** January 22, 2015, 12:40:53 pm »

Wanna let the stock swingarm and bearings carrier go cheap?

LTcoastieR · « **Reply #15 on:** January 22, 2015, 04:24:13 pm »

The stock swingarm broke at the bolts for the carrier. PM me with your idea of "cheap" plus shipping.

Bryan L · « **Reply #16 on:** January 24, 2015, 12:53:58 pm »

you got PM Bryan

Serg500 · « **Reply #17 on:** January 25, 2015, 07:19:51 am »

PM sent

Dangerouspower · « **Reply #18 on:** January 25, 2015, 05:14:23 pm »

I'm in search of a good back half of one thats now gonna do me anygood thanks anyways.

Bryan L · « **Reply #19 on:** January 25, 2015, 07:29:12 pm »

well Ill buy the Renthal Bars/ Pro taper grips $40 if still available allso like to have that Service manual i saw in one of those pics . PM me that shipping quote thanks.. Bryan

LTcoastieR · « **Reply #20 on:** January 26, 2015, 04:37:28 pm »

Not having the ability to edit my posts is very annoying (Mods can you fix this?)....

Updated parts list:

FMF full exhaust - $250
Skull seat/shock covers - $20
Motor/trans (will not split) (ran/shifted great a few years ago) - $500 *Will not ship, but willing to meet*
Extra jug - $50
Reeds - $10
All Balls ball joint set (4 total) (left&right, upper&lower) - $50
Pivot works Upper/lower A-arm bearing kits (2) - $60
6-Pack rack and 1 gallon gas can - $25
Seat - $50
DC style font bumper - $40

Serg500 · « **Reply #21 on:** January 27, 2015, 06:36:38 am »

Pm sent

LTcoastieR · « **Reply #22 on:** February 11, 2015, 01:32:48 pm »

Updated List 11Feb15:

FMF full exhaust - $250
Skull seat/shock covers - $20
Motor/trans (will not split) (ran/shifted great a few years ago) - $350 *Will not ship, but willing to meet*
Extra jug - $50
6-Pack rack and 1 gallon gas can - $25
Seat - $50
DC style font bumper - $40
Original tires mounted on ITP rims - $50

GrkGuy · « **Reply #23 on:** February 11, 2015, 04:40:38 pm »

I want the six pak rak
Please pm me payment info.

LTcoastieR · « **Reply #24 on:** March 07, 2015, 04:02:31 pm »

I have a lot of stock/factory parts, please don't make me throw this stuff out.

News:

Author Topic: 85 LT250R lost interest mid restoration (a lot of aftermarket parts) (Read 1114 times)

Suzuki Quadracer HQ Store Zone