1988 LT250R Part-Out... Many Aftermarket... Nice Stuff

1988 LT250R Part-Out... Many Aftermarket... Nice Stuff
Posted by FX4Pitrone on 28 Sep, 2012 21:25
**PENDING**MOTOR: $800
1988 Powervalved motor, painted black w/ polished clutch, stator, water pump, and PV cover (polishing by Race Reflections)
Brand new Hot Rods complete crank
Brand new OEM crank bearings and seals
Newly rebuilt water pump
Billet thrust washers w/ RM250 wrist pin bearing (reliability mod.)
Squish set
All new gaskets throughout
Sleeved and ported cylinder (not sure by who, no engraving)
Case saver bosses in tact
Cases were split and everything was cleaned and inspected and assembled by Carl

$190 Paul Turner MX race pipe w/ Fatboy 2 silencer and flange and hose techniques pipe "clamp"
$135 V-force 2 reed cage w/ new reeds and port-matched intake boot (by Carl)
$50 Stock mikuni carb (2 or 3 of them)
$90 Mikuni TMS 38 carb

CHASSIS:
$325 1988 MINT frame, gussetted, PC'd black
**PENDING**$375 SLC Chromoly round-housing (Honda style) swinger, PC'd silver w/ clear
$275 Stock A-arms w/ brand new seals and bearings, and Tie-rods, PC'd silver w/ clear, w/ brand new ball joints and rod ends all-around, camber mod done on lower arms
$300 White plastics w/ DDrslapp custom OEM decals in black/gray/white
$85 Brand new Maier custom hood and cap (White carbon fiber look)
**PENDING**$60 DG Baja chassis skid w/ all mounts
$80 ea. PRM Swingarm Skidplates (stock swinger skid, and SLC skid, SLC skid has custom billet spacers from SBLT, both plates are .250 thick,) both brand new
**PENDING**$80 PRM Chassis skid w/ mounts, will include brand new mounting plates and hardware from PRM as well
$65 PRM A-arm skid plates w/ all mounts
**PENDING**$140 OEM axle, fresh zinc coated, looks better than new, w/ zinc'd sprocket hub and PC'd brake hub, straight, mint... will also include newly zinc coated rear brake rotor
$75 Polished RAD axle nuts
$85 Rebuilt front calipers (brand new OEM pistons/seals, glass beaded calipers, PC'd black brackets)
$75 OEM stem, mint (blasted and painted)
$35 OEM front shocks
$35 OEM rear shock w/ linkage (will need rebuild, I'm assuming!)
$60 Pegs w/ extensions, mint, PC'd black, zinc'd hardware
**PENDING**$75 Polished aluminum DG nerfs w/ blue nets (no rips) and mounting brackets (Zinc'd)
$75 Mint fuel tank w/ BRAND NEW OEM fuel petcock/screens, gasket, new OEM fuel line
$60 OEM radiator (painted flat black) w/ brand new OEM upper and lower hoses
I have soooo many other parts available... e-mail, call or text w/ needs.

$35 TM Designworks chain slider (fits OEM swinger, maybe others)
$80 6-pack rack, black (not sure on brand... PRM or Armadillo?), new
$50 Spindles, sand-blasted primed, and painted black, tie-rod end bracket PC'd silver sparkle w/ clear
$20 Chain adjuster plates, Blasted and PC'd black, new
$20 Thumb throttle cover and seat/front fender clip, Blasted and PC'd black, new
$15 Water pump cover, semi-polished
$20 Stator cover, polished,
$25 Black Maier radiator cap, new
$35 Rear shock bracket, PC'd silver sparkle w/ clearcoat
$70 8" rear ITP wheels (4/110 rear pattern), 18" Holeshot MXR tires (worn out)
$165 Brand new polished DWT black labels (4/166 front pattern, 250 or zilla) w/ Maxxis I-Razr 6-ply radials, newer... no plugs, perfect
$30 Rear grab bar, PC'd black (AC?), mint
$45 Rear fender braces, great shape, w/ all rubber grommets, except 2, PC'd black
$15 Sprocket hub, PC'd black
$15 rear caliper hub w/ C-clip, PC'd black
$30 Rear brake pedal, drilled, PC'd silver sparkle w/ clear
**PENDING**$80 Front and rear sprocket (12-42) and chain.... NEW
**PENDING**$40 Pivot Works Linkage bearing kit (New, in pkg)
$20 (each, have 3) Pivot Works shock bearing kits
$35 New (in plastic) Maier Yamaha Blaster screened front hood, black, 99-02

Paypal as gift please.... prices are plus shipping...

Will TRADE for Quadzilla aftermarket parts or TRX250r parts ONLY... must be nice! No junk please!

(Eight-six-zero) 424-6574

#1 Reply
Posted by FX4Pitrone on 28 Sep, 2012 21:31

#2 Reply
Posted by FX4Pitrone on 28 Sep, 2012 21:37

#3 Reply
Posted by FX4Pitrone on 28 Sep, 2012 21:45

#4 Reply
Posted by FX4Pitrone on 10 Oct, 2012 19:01
BUMP! Updated list of whats left below:

$190 Paul Turner MX race pipe w/ Fatboy 2 silencer and flange and hose techniques pipe "clamp"
$50 Stock mikuni carb (2 or 3 of them)
$90 Mikuni TMS 38 carb

CHASSIS:
$325 1988 MINT frame, gussetted, PC'd black
$150 Stock A-arms w/ brand new seals and bearings throughout, and Tie-rods, PC'd silver w/ clear, camber mod done on lower arms
$300 White plastics w/ DDrslapp custom OEM decals in black/gray/white
$80 Brand new Maier custom hood and cap (White carbon fiber look)
$50 PRM A-arm skid plates w/ all mounts
$85 Rebuilt front calipers (brand new OEM pistons/seals, glass beaded calipers, PC'd black brackets)
$65 OEM stem, mint (blasted and painted)
$30 OEM front shocks
$30 OEM rear shock w/ linkage (will need rebuild, I'm assuming!)
$60 Pegs w/ extensions, mint, PC'd black, zinc'd hardware
$75 Mint fuel tank w/ BRAND NEW OEM fuel petcock/screens, gasket, new OEM fuel line
$50 OEM radiator (painted flat black) w/ brand new OEM upper and lower hoses
I have soooo many other parts available... e-mail, call or text w/ needs.

$30 TM Designworks chain slider (fits OEM swinger, maybe others)
$75 6-pack rack, black (not sure on brand... PRM or Armadillo?), new
$45 Spindles, sand-blasted primed, and painted black, tie-rod end bracket PC'd silver sparkle w/ clear
$20 Chain adjuster plates, Blasted and PC'd black, new
$20 Thumb throttle cover and seat/front fender clip, Blasted and PC'd black, new
$15 Water pump cover, semi-polished
$20 Stator cover, polished,
$20 Black Maier radiator cap, new
$30 Rear shock bracket, PC'd silver sparkle w/ clearcoat
$70 8" rear ITP wheels (4/110 rear pattern), 18" Holeshot MXR tires (worn out)
$165 Brand new polished DWT black labels (4/166 front pattern, 250 or zilla) w/ Maxxis I-Razr 6-ply radials, newer... no plugs, perfect
$30 Rear grab bar, PC'd black (AC?), mint
$15 Sprocket hub, PC'd black
$15 rear caliper hub w/ C-clip, PC'd black
$30 Rear brake pedal, drilled, PC'd silver sparkle w/ clear
$35 New (in plastic) Maier Yamaha Blaster screened front hood, black, 99-02

Paypal as gift please.... prices are plus shipping...

Will TRADE for Quadzilla aftermarket parts or TRX250r parts ONLY... must be nice! No junk please!

(Eight-six-zero) 424-6574

#5 Reply
Posted by FX4Pitrone on 24 Oct, 2012 06:11
Bump!! List and prices updated in last post (above^^)!

#6 Reply
Posted by Gillio on 24 Oct, 2012 06:50
Tony, Whats up with that anti vibe steering stem?

#7 Reply
Posted by FX4Pitrone on 24 Oct, 2012 06:51
Long gone Gilles... sorry that was one of the first to go!! Yuzuha is rocking it!

#8 Reply
Posted by Gillio on 24 Oct, 2012 07:26
damn him, I guess I'll need him to order one for me now. lol

#9 Reply
Posted by Yuzuha32 on 27 Oct, 2012 10:38
looks good doesn't it

#10 Reply
Posted by Mitch Keller on 27 Oct, 2012 11:54
Are these sold?
$135 V-force 2 reed cage w/ new reeds and port-matched intake boot (by Carl)

#11 Reply
Posted by FX4Pitrone on 28 Oct, 2012 20:31
Yes it does look good Jason... and yes they have been sold Mitch.....

#12 Reply
Posted by Gillio on 29 Oct, 2012 09:53
That stem looks ok, I think it would have looked better on my 250 lol

#13 Reply
Posted by FX4Pitrone on 26 Nov, 2012 17:36
6-pack rack sold! BUMP!

#14 Reply
Posted by Bhatch21 on 28 Nov, 2012 07:27
Do the brake lines go with the calipers, or will you sell those separate? Are they attached to a stock master?

#15 Reply
Posted by FX4Pitrone on 28 Nov, 2012 07:44
Let me check on that... the brakelines may be gone? I had them on a Z400 or LTR450 master cylinder.... I still have the master cylinders (a couple) if you need those....

#16 Reply
Posted by CrazyJ789 on 28 Nov, 2012 09:13
Are those ltz400 front hubs on there? If so are those front rotors straight? Mine are warped and I need some new rotors...lmk...also did you change your mind on those greydons you were selling earlier

#17 Reply
Posted by FX4Pitrone on 28 Nov, 2012 10:53
No Jay, those are LT hubs.... and not yet on the nerfs... but that could change

#18 Reply
Posted by GrkGuy on 01 Dec, 2012 22:04
ok whtas left,

#19 Reply
Posted by FX4Pitrone on 01 Dec, 2012 22:21
$50 Stock mikuni carb (2 or 3 of them)
$90 Mikuni TMS 38 carb
Brand new OEM LT250r carb slide... never run...perfect -make offer
CHASSIS:
$Pending 1988 MINT frame, gussetted, PC'd black
$150 Stock A-arms w/ brand new seals and bearings throughout, and Tie-rods, PC'd silver w/ clear, camber mod done on lower arms
$300 White plastics w/ DDrslapp custom OEM decals in black/gray/white
$80 Brand new Maier custom hood and cap (White carbon fiber look)
$45 PRM A-arm skid plates w/ all mounts
$85 Rebuilt front calipers (brand new OEM pistons/seals, glass beaded calipers, PC'd black brackets)
$65 OEM stem, mint (blasted and painted)
$30 OEM front shocks
$30 OEM rear shock w/ linkage (will need rebuild, I'm assuming!)
$60 Pegs w/ extensions, mint, PC'd black, zinc'd hardware
$75 Mint fuel tank w/ BRAND NEW OEM fuel petcock/screens, gasket, new OEM fuel line
$50 OEM radiator (painted flat black) w/ brand new OEM upper and lower hoses
I have soooo many other parts available... e-mail, call or text w/ needs.

$30 TM Designworks chain slider (fits OEM swinger, maybe others)
$75 6-pack rack, black (not sure on brand... PRM or Armadillo?), new
$45 Spindles, sand-blasted primed, and painted black, tie-rod end bracket PC'd silver sparkle w/ clear
$20 Chain adjuster plates, Blasted and PC'd black, new
$20 Thumb throttle cover and seat/front fender clip, Blasted and PC'd black, new
$15 Water pump cover, semi-polished
$20 Stator cover, polished,
$20 Black Maier radiator cap, new
$30 Rear shock bracket, PC'd silver sparkle w/ clearcoat
$70 8" rear ITP wheels (4/110 rear pattern), 18" Holeshot MXR tires (worn out)
$165 Brand new polished DWT black labels (4/166 front pattern, 250 or zilla) w/ Maxxis I-Razr 6-ply radials, newer... no plugs, perfect
$30 Rear grab bar, PC'd black (AC?), mint
$15 Sprocket hub, PC'd black
$15 rear caliper hub w/ C-clip, PC'd black
$30 Rear brake pedal, drilled, PC'd silver sparkle w/ clear
$35 New (in plastic) Maier Yamaha Blaster screened front hood, black, 99-02

Also have:
Mint lt250r head, cut...very nice!
Tag T2 fat bars,chrome
OEM LT250r seat w/ original "no passenger" and "quadracer" on it... exc shape top and bottom, small hole in rear side
ORM LT250r CAMO seat ... all original.... very good cond... few small stains, and small hole. Could be cleaned up though and look great!
Zinc plated front 250 rotors
Zinc plated front zilla rotors
Zinc plated Zilla upper a-arm bolts
Zilla complete air box
Zilla original seat w/ original cover
Mint lt250r straight seat w/ new foam and black cover
Lt250r straight seat blue w/ whitle stiching "racer x"
Maier hood
Lots of front master cylinders
front hubs
clutch cover w/ materpump cover
pegs
lots!!!!

Paypal as gift please.... prices are plus shipping...

Will TRADE for Quadzilla aftermarket parts or TRX250r parts ONLY... must be nice! No junk please!

(Eight-six-zero) 424-6574

#20 Reply
Posted by FX4Pitrone on 09 Dec, 2012 19:45
BUMP!! Frame sold and 6-pack rack sold!! Also have other parts not listed... feel free to contact me if you need something you don't see....

#21 Reply
Posted by GrkGuy on 18 Dec, 2012 08:42
looks like you have a ton of nice stuff left. Bump for a good guy.

#22 Reply
Posted by GrkGuy on 25 Dec, 2012 18:14
do you still have the 250 head, and was the squish cut on it, and how much for the blue T seat

#23 Reply
Posted by FX4Pitrone on 25 Dec, 2012 20:03
John, I don't know much about the head except it's beautiful! LOL... I'll post up pics tomorrow... I'd let the seat go for 85 shipped.... it's not perfect, but it's a really nice original.. I'll also get some pics of that up tomorrow ...... I'll also trade for Zilla parts... or Honda 250r....