**PENDING**MOTOR: $800
1988 Powervalved motor, painted black w/ polished clutch, stator, water pump, and PV cover (polishing by Race Reflections)
Brand new Hot Rods complete crank
Brand new OEM crank bearings and seals
Newly rebuilt water pump
Billet thrust washers w/ RM250 wrist pin bearing (reliability mod.)
Squish set
All new gaskets throughout
Sleeved and ported cylinder (not sure by who, no engraving)
Case saver bosses in tact
Cases were split and everything was cleaned and inspected and assembled by Carl

$190 Paul Turner MX race pipe w/ Fatboy 2 silencer and flange and hose techniques pipe "clamp"
$135 V-force 2 reed cage w/ new reeds and port-matched intake boot (by Carl)
$50 Stock mikuni carb (2 or 3 of them)
$90 Mikuni TMS 38 carb

CHASSIS:
$325 1988 MINT frame, gussetted, PC'd black
**PENDING**$375 SLC Chromoly round-housing (Honda style) swinger, PC'd silver w/ clear
$275 Stock A-arms w/ brand new seals and bearings, and Tie-rods, PC'd silver w/ clear, w/ brand new ball joints and rod ends all-around, camber mod done on lower arms
$300 White plastics w/ DDrslapp custom OEM decals in black/gray/white
$85 Brand new Maier custom hood and cap (White carbon fiber look)
**PENDING**$60 DG Baja chassis skid w/ all mounts
$80 ea. PRM Swingarm Skidplates (stock swinger skid, and SLC skid, SLC skid has custom billet spacers from SBLT, both plates are .250 thick,) both brand new
**PENDING**$80 PRM Chassis skid w/ mounts, will include brand new mounting plates and hardware from PRM as well
$65  PRM A-arm skid plates w/ all mounts
**PENDING**$140 OEM axle, fresh zinc coated, looks better than new, w/ zinc'd sprocket hub and PC'd brake hub, straight, mint... will also include newly zinc coated rear brake rotor
$75 Polished RAD axle nuts
$85  Rebuilt front calipers (brand new OEM pistons/seals, glass beaded calipers, PC'd black brackets)
$75 OEM stem, mint (blasted and painted)
$35 OEM front shocks
$35 OEM rear shock w/ linkage (will need rebuild, I'm assuming!)
$60 Pegs w/ extensions, mint, PC'd black, zinc'd hardware
**PENDING**$75 Polished aluminum DG nerfs w/ blue nets (no rips) and mounting brackets (Zinc'd)
$75 Mint fuel tank w/ BRAND NEW OEM fuel petcock/screens, gasket, new OEM fuel line
$60 OEM radiator (painted flat black) w/ brand new OEM upper and lower hoses
I have soooo many other parts available... e-mail, call or text w/ needs.

$35  TM Designworks chain slider (fits OEM swinger, maybe others)
$80  6-pack rack, black (not sure on brand... PRM or Armadillo?), new
$50  Spindles, sand-blasted primed, and painted black, tie-rod end bracket PC'd silver sparkle w/ clear
$20  Chain adjuster plates, Blasted and PC'd black, new
$20  Thumb throttle cover and seat/front fender clip, Blasted and PC'd black, new
$15  Water pump cover, semi-polished
$20  Stator cover, polished,
$25  Black Maier radiator cap, new
$35  Rear shock bracket, PC'd silver sparkle w/ clearcoat
$70  8" rear ITP wheels (4/110 rear pattern), 18" Holeshot MXR tires (worn out)
$165  Brand new polished DWT black labels (4/166 front pattern, 250 or zilla) w/ Maxxis I-Razr 6-ply radials, newer... no plugs, perfect
$30  Rear grab bar, PC'd black (AC?), mint
$45  Rear fender braces, great shape, w/ all rubber grommets, except 2, PC'd black
$15  Sprocket hub, PC'd black
$15  rear caliper hub w/ C-clip, PC'd black
$30  Rear brake pedal, drilled, PC'd silver sparkle w/ clear
**PENDING**$80  Front and rear sprocket (12-42) and chain.... NEW
**PENDING**$40  Pivot Works Linkage bearing kit (New, in pkg)
$20 (each, have 3)  Pivot Works shock bearing kits
$35  New (in plastic) Maier Yamaha Blaster screened front hood, black, 99-02

Paypal as gift please.... prices are plus shipping...

Will TRADE for Quadzilla aftermarket parts or TRX250r parts ONLY... must be nice! No junk please!

(Eight-six-zero) 424-6574

BUMP!  Updated list of whats left below:

$190 Paul Turner MX race pipe w/ Fatboy 2 silencer and flange and hose techniques pipe "clamp"
$50 Stock mikuni carb (2 or 3 of them)
$90 Mikuni TMS 38 carb

CHASSIS:
$325 1988 MINT frame, gussetted, PC'd black
$150 Stock A-arms w/ brand new seals and bearings throughout, and Tie-rods, PC'd silver w/ clear, camber mod done on lower arms
$300 White plastics w/ DDrslapp custom OEM decals in black/gray/white
$80 Brand new Maier custom hood and cap (White carbon fiber look)
$50  PRM A-arm skid plates w/ all mounts
$85  Rebuilt front calipers (brand new OEM pistons/seals, glass beaded calipers, PC'd black brackets)
$65 OEM stem, mint (blasted and painted)
$30 OEM front shocks
$30 OEM rear shock w/ linkage (will need rebuild, I'm assuming!)
$60 Pegs w/ extensions, mint, PC'd black, zinc'd hardware
$75 Mint fuel tank w/ BRAND NEW OEM fuel petcock/screens, gasket, new OEM fuel line
$50 OEM radiator (painted flat black) w/ brand new OEM upper and lower hoses
I have soooo many other parts available... e-mail, call or text w/ needs.

$30  TM Designworks chain slider (fits OEM swinger, maybe others)
$75  6-pack rack, black (not sure on brand... PRM or Armadillo?), new
$45  Spindles, sand-blasted primed, and painted black, tie-rod end bracket PC'd silver sparkle w/ clear
$20  Chain adjuster plates, Blasted and PC'd black, new
$20  Thumb throttle cover and seat/front fender clip, Blasted and PC'd black, new
$15  Water pump cover, semi-polished
$20  Stator cover, polished,
$20  Black Maier radiator cap, new
$30  Rear shock bracket, PC'd silver sparkle w/ clearcoat
$70  8" rear ITP wheels (4/110 rear pattern), 18" Holeshot MXR tires (worn out)
$165  Brand new polished DWT black labels (4/166 front pattern, 250 or zilla) w/ Maxxis I-Razr 6-ply radials, newer... no plugs, perfect
$30  Rear grab bar, PC'd black (AC?), mint
$15  Sprocket hub, PC'd black
$15  rear caliper hub w/ C-clip, PC'd black
$30  Rear brake pedal, drilled, PC'd silver sparkle w/ clear
$35  New (in plastic) Maier Yamaha Blaster screened front hood, black, 99-02

Paypal as gift please.... prices are plus shipping...

Will TRADE for Quadzilla aftermarket parts or TRX250r parts ONLY... must be nice! No junk please!

(Eight-six-zero) 424-6574

Tony, Whats up with that anti vibe steering stem?

damn him, I guess I'll need him to order one for me now. lol

Are these sold?
$135 V-force 2 reed cage w/ new reeds and port-matched intake boot (by Carl)

That stem looks ok, I think it would have looked better on my 250 lol

Do the brake lines go with the calipers, or will you sell those separate?  Are they attached to a stock master?

Are those ltz400 front hubs on there?  If so are those front rotors straight?  Mine are warped and I need some new rotors...lmk...also did you change your mind on those greydons you were selling earlier

ok whtas  left,

BUMP!! Frame sold and 6-pack rack sold!!  Also have other parts not listed... feel free to contact me if you need something you don't see....

do you still have the 250 head, and was the squish cut on it, and how much for the blue T seat

i see you had head was cut, thought that meant squish. ok send pics thanks