+-
« previous next »
Pages: [1]   Go Down

Author Topic: Wrapping AAEN  (Read 1040 times)

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 70
  • Gender: Male
  • Location: Europe
Wrapping AAEN
« on: January 08, 2013, 02:49:41 pm »
Thx to Deebo got my AAEN Pipe a while ago and am pretty happy with it

Since u can ride them quads down here in Germany also on the streets I am trying to silence down the AAEN Pipe a bit ... The header is the one making the pinging noise just like a disc saw when u hit the throttle so what about wrapping that up with some heat wrap they use for car engines with a turbo ... or some Harley folks are covering their pipes with that as well ?

Any objection for a 2 stroke engine to do so ? Let me know please ;)
Logged
88`GOAT.zilla ...

Share on Bluesky Share on Facebook

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 70
  • Gender: Male
  • Location: Europe
Re: Wrapping AAEN
« Reply #1 on: January 09, 2013, 02:12:01 pm »
 <1>
Logged
88`GOAT.zilla ...

Offline

  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 2058
Re: Wrapping AAEN
« Reply #2 on: January 09, 2013, 02:31:49 pm »
Honda trx250r oem pipes are dual walled to lessen noise. That's not much help for sure...

Logged
87 HPR LT500
04 Roll LOBO II TRX250R
06 LTR450
87 LT500
85 & 86 LT250
86 & 87 TRX250R
07 & 09 Husqvarna TE450
00 CR125R

Offline

  • Trade Count: (0)
  • Range Rover
  • *****
  • Posts: 306
  • Gender: Male
  • Location: Central Mass
Re: Wrapping AAEN
« Reply #3 on: January 09, 2013, 02:34:34 pm »
Last picture of the bike of the week on the home page has wrap on his pipe.
Logged

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 70
  • Gender: Male
  • Location: Europe
Re: Wrapping AAEN
« Reply #4 on: January 09, 2013, 03:00:31 pm »
does it effect performance, overheating engine, cracking the pipe ?!?

 ... just dont want to mess up ma zilla ...
Logged
88`GOAT.zilla ...

Offline

  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 161
  • Gender: Male
Re: Wrapping AAEN
« Reply #5 on: January 09, 2013, 05:08:50 pm »
do you already have the spark arrestor silencer or the smaller one, someone on here said the sparky silencer was too restrictive on motor, on the old site some guys were mentioning it was a good silencer for state parks where noise is a problem.
Logged
87  LT500R
98  sporstman500

Offline

  • Trade Count: (0)
  • Pro Member
  • ********
  • Posts: 858
Re: Wrapping AAEN
« Reply #6 on: January 09, 2013, 10:35:38 pm »
Quote from: 2StrokeBandit on January 09, 2013, 03:00:31 pm
does it effect performance, overheating engine, cracking the pipe ?!?

 ... just dont want to mess up ma zilla ...

Wrapping the pipe will reduce the noice that rings off the body of the pipe. 

Wrapping the pipe will typically push the torque and power peak 100 to 400 RPM higher. 

Wrapping the pipe should not make it crack unless the pipe was constructed from inferior materials, the wrong welding filler rod was used or the welds are too thick.
Logged

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 70
  • Gender: Male
  • Location: Europe
Re: Wrapping AAEN
« Reply #7 on: January 10, 2013, 03:06:12 pm »
got the smaller one .. so no spark arrestor for me ... even by the looks i wouldnt swap necessarily xD^^

@Geek
if thats the case, i will wrap that bad boy up  .... thx m8 ;)
Logged
88`GOAT.zilla ...

Offline

  • ToxicRedNeck.com
  • Trade Count: (0)
  • Weekend Warrior
  • ****
  • Posts: 157
  • Gender: Male
  • my youtube Channel ToxicRedNeck.com
  • Location: Manitoba Canada
    • ToxicRedNeck.com
Re: Wrapping AAEN
« Reply #8 on: January 10, 2013, 03:43:38 pm »
Lots of PPL Will Say you will Over Heat it... But I call BullShit on that. And did it on Lots of my Bikes. (Yz490, Yz250's And Yz400 ) 
 And the Shop i use to work at Puts it on 2 Strokes all the time.


I know A Lot of ppl that do this and i Love the Sound of a Big Bore Bike With Wrapping on the Full pipe
Logged
1988 LT500R QuadZilla , Working on a Complete Restoration! Check out my youtube channel! www.youtube.com/starpuss

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 70
  • Gender: Male
  • Location: Europe
Re: Wrapping AAEN
« Reply #9 on: January 10, 2013, 04:18:19 pm »
got it loud and clear ;)

once i got it all wrapped up on my aaen pipe nice and tight  (after having soaked up the wrap with water) and fixed it with stainless-steel-wire, and run the motor to dry out the wrap.

only concern left, will the wrap not move down from the broader parts of the pipe towards the ends after I have some heat cycles and hours running the zilla ?!?  hope not cuz that will be a waste of bucks i guess then ...
Logged
88`GOAT.zilla ...

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 101
Re: Wrapping AAEN
« Reply #10 on: January 13, 2013, 07:00:53 am »
FYI, I have seen pipe wrap hold water and never dry out. To the point they rot out the pipe.

If you run on road, I would think your in a higher rpm steady state cruise. I would not be in a hurry to wrap. Run it and make sure you have no issues as a road runner before wrap
Logged

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 70
  • Gender: Male
  • Location: Europe
Re: Wrapping AAEN
« Reply #11 on: January 16, 2013, 04:17:50 pm »
allright m8, will wait and try first ;) If the cops hunt me down due to noise pollution I tell them you told me to ride it like I stole it xD^^ hehehe
Logged
88`GOAT.zilla ...
Pages: [1]   Go Up
« previous next »
 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store