Author Topic: DCS-Version 5 With Some Dyno Testing. (Read 5275 times)

GrkGuy · « **Reply #25 on:** April 09, 2013, 01:59:26 pm »

so whos pipe did you copy.

Mitch Keller · « **Reply #26 on:** April 09, 2013, 03:16:08 pm »

There is one in every group, this was the input of few Old School designers to come up with design, Not one of these designers have seen a Q pipe or a Hall Pipe, like I said this is a modified DCS-4 turned into a 5 who knows I might keep refining to DCS-6 till I am happy with the Low Mid High Graph, to be honest its starting to get a bit pricey not the pipe MFG its the research and dyno testing and just time devoted to this project.
To be honest I will be making less than 10 pipes and thats it!
I am working on pricing to sell these at a economical cost and I am mainly selling raw pipes but I will offer plated, just note there is alot more metal prep for me for plating, you might want to see if you have someone local that can do it more cost effective.

JayTater · « **Reply #27 on:** April 09, 2013, 05:00:44 pm »

John gotta be a d!ck huh? LMAO, just kidding

BadMoonRacing500 · « **Reply #28 on:** April 09, 2013, 06:05:52 pm »

Mitch don't forget 1 of the chrome one's is for me....

Alkyzilla · « **Reply #29 on:** April 09, 2013, 06:52:06 pm »

I hear they will be selling LT500 pipes at Harbor Freight pretty soon...I would hold out for that one.

Mitch Keller · « **Reply #30 on:** April 09, 2013, 06:58:10 pm »

Quote from: Alkyzilla on April 09, 2013, 06:52:06 pm

I hear they will be selling LT500 pipes at Harbor Freight pretty soon...I would hold out for that one.

LOL thats funny!!!

Duneatic70 · « **Reply #31 on:** April 09, 2013, 07:01:59 pm »

Wow!!! Thats Funny!!!! Harbor freight pipes!!!!!

Mitch Keller · « **Reply #32 on:** April 09, 2013, 08:03:18 pm »

Quote from: Duneatic70 on April 09, 2013, 07:01:59 pm

Wow!!! Thats Funny!!!! Harbor freight pipes!!!!!suzukiquadracerhqsuzukiquadracerhqsuzukiquadracerhqsuzukiquadracerhqsuzukiquadracerhqsuzukiquadracerhq

DCS-6 Only $69.95!! Heat Sheild is Extra $29.95 Order yours today!

Buckeye513 · « **Reply #33 on:** April 09, 2013, 08:13:20 pm »

I hear that harbor freight will have two models one that gets good power for reasonable money and another that gets 2 horse power more for double the money for those people that really need every single horse they can uncover... The pipes are pictured below

BadMoonRacing500 · « **Reply #34 on:** April 09, 2013, 08:16:56 pm »

Quote from: Buckeye513 on April 09, 2013, 08:13:20 pm

I hear that harbor freight will have two models one that gets good power for reasonable money and another that gets 2 horse power more for double the money for those people that really need every single horse they can uncover... The pipes are pictured below

* image.jpg (339.36 kB, 1023x764 - viewed 1 times.)

GrkGuy · « **Reply #35 on:** April 10, 2013, 11:25:49 am »

i cant belive WTK didnt know about the Harbor freight pipes coming out.

WestTexasKing · « **Reply #36 on:** April 10, 2013, 11:37:08 am »

Who do you think did all of the R&D for them?
Way to spoil to surprise vag :p

Mitch Keller · « **Reply #37 on:** April 10, 2013, 02:55:40 pm »

Wait who gets there pipe sold out of Walmart then??

Mitch Keller · « **Reply #38 on:** May 01, 2013, 10:14:41 am »

Few more graphs, DCS-4 and the DCS-5 with a Q-V2 , still have some more refinements that I should start working on sometime next week then back to the dyno, DCS-5 looking better but I want smoother lines, better Exhaust Flange set up also. and better silencer set up, The goal is to pass Q -V2 on Low Mid Top HP and Torque, But.... with a standard 90s type porting.
We seem to be fixing that flat spot between 6000 to 7000 RPM

Dezsled · « **Reply #39 on:** May 01, 2013, 10:35:10 am »

Q2W · « **Reply #40 on:** May 01, 2013, 11:20:42 am »

DC5 is looking real nice mitch. big jump over version 4. congrats on your progress.

JayTater · « **Reply #41 on:** May 01, 2013, 12:49:25 pm »

Testing on the same mule for the 5 and Q?

Mitch Keller · « **Reply #42 on:** May 01, 2013, 12:52:28 pm »

YUP!!!!!! Same 87 as last time., Getting Ready to do that 88 top end dynoed to compare.

Kreidy818 · « **Reply #43 on:** May 01, 2013, 02:30:55 pm »

What HP does a stocker put out ?

WestTexasKing · « **Reply #44 on:** May 01, 2013, 02:57:25 pm »

Quote from: Kreidy818 on May 01, 2013, 02:30:55 pm

What HP does a stocker put out ?

It's about 5HP more than the top curve on the dyno sheet above.

Mitch Keller · « **Reply #45 on:** May 01, 2013, 03:06:35 pm »

Quote from: Kreidy818 on May 01, 2013, 02:30:55 pm

What HP does a stocker put out ?

Suzuki claimed 50hp, at the crank, be like 41 to 42 HP at the rear wheels.

Kreidy818 · « **Reply #46 on:** May 01, 2013, 05:11:46 pm »

good ond WTK. !

WestTexasKing · « **Reply #47 on:** May 01, 2013, 09:04:07 pm »

I just have to know, whose pipe works best down low?

PCS · « **Reply #48 on:** May 02, 2013, 12:04:02 am »

looks like the top pipe is straddling the lower pipe...

Buckeye513 · « **Reply #49 on:** May 02, 2013, 03:04:03 am »

I would definitely say the top pipe is dominating the bottom pipe!

News:

Author Topic: DCS-Version 5 With Some Dyno Testing. (Read 5275 times)

Suzuki Quadracer HQ Store Zone