Author Topic: DCS-Version 5 With Some Dyno Testing. (Read 5268 times)

Mitch Keller · « **on:** March 28, 2013, 11:53:58 am »

Getting Ready to set up a dyno testing date soon, Just rode it around the shop area seems to have the same torque as the V-4 put pulls higher RPM, Dyno testing should tell me how we did on this one, This is a DCS-4 modified to Version 5, If the dyno graphs look good a new jig will be done and next batch of pipes should be ready sometime in May. Many Thanks to Don Kistler, Dave Miller, Harry Klemm for there input on this design!
Folks just note Im doing this as a Hobby Project, And looking to make a few extra pipes to cover the cost is all.

DCS-4

Mitch Keller · « **Reply #1 on:** March 28, 2013, 11:56:36 am »

V-4 and a V-5

JayTater · « **Reply #2 on:** March 28, 2013, 12:03:56 pm »

That is one sexy combo of cones and welds Mitch.

FX4Pitrone · « **Reply #3 on:** March 28, 2013, 12:10:25 pm »

Klemm was in on this pipe!?

Mitch Keller · « **Reply #4 on:** March 28, 2013, 12:13:24 pm »

I was told by Don that a phone call was made to him for some input.. And I talked to Dave Miller DMC. My goal was to get that 6000 - 7000 rpm handled.

Julle74 · « **Reply #5 on:** March 28, 2013, 12:16:56 pm »

I would love to buy one, looks great

Mercenary223 · « **Reply #6 on:** March 28, 2013, 12:24:56 pm »

Looks good.

Q2W · « **Reply #7 on:** March 28, 2013, 12:51:51 pm »

interested to see how it runs.

Mitch Keller · « **Reply #8 on:** March 28, 2013, 12:58:15 pm »

Quote from: Q2W on March 28, 2013, 12:51:51 pm

interested to see how it runs.

You and me Both!!!

Tyson · « **Reply #9 on:** March 28, 2013, 01:22:19 pm »

looking good.

Dezsled · « **Reply #10 on:** March 28, 2013, 02:02:56 pm »

Dayum.... That looks the part.

Get some graphs! Man I am looking forward to seeing a DCS 5...

Yer burnin daylight Mitch!

Mitch Keller · « **Reply #11 on:** March 28, 2013, 02:12:38 pm »

Damnnnn that day job thangy, keeps getting in the way of play time..........

Looks like Dyno Time is next Sat, anyone local have a FMF LRD, or any other make of pipe? might test a few again.

Dezsled · « **Reply #12 on:** March 28, 2013, 03:32:44 pm »

I got an fmf / answer combo you can use

Mitch Keller · « **Reply #13 on:** March 28, 2013, 03:33:59 pm »

Great! Oh Pics are changed Mike.

Chuckie25 · « **Reply #14 on:** March 28, 2013, 05:49:20 pm »

Looks good but looks like more of a top end / dune pipe? Also, what about making up some 250 pipes Mitchell, or a hybrid pipe.

Buckeye513 · « **Reply #15 on:** March 28, 2013, 06:11:42 pm »

Good looking pipe Mitch! Interested to see what it does on the old drum roller.

Hotbutta · « **Reply #16 on:** March 28, 2013, 06:55:35 pm »

I luv Harry and GroupK. Some people hate on them but their work and wealth of knowledge is impressive.

Dezsled · « **Reply #17 on:** April 08, 2013, 06:20:38 pm »

Did you say dyno runs....?

.

Mitch Keller · « **Reply #18 on:** April 08, 2013, 07:13:17 pm »

Still in testing here is a dyno from today-DCS-5 (04-08-13) / QV-2 from the last session (02-02-13) to compare.

Mitch Keller · « **Reply #19 on:** April 08, 2013, 07:24:57 pm »

Some DCS-5 Graphs 3-8-13 w/DCS-4 Graph from 2-2-13
Working on some tuning issues to smooth out the lines some more , easy fix, should hit the dyno again in a few weeks.

PCS · « **Reply #20 on:** April 08, 2013, 08:37:35 pm »

good looking #'s

Dezsled · « **Reply #21 on:** April 09, 2013, 07:25:07 am »

Time to crank up the production mill?

Mitch Keller · « **Reply #22 on:** April 09, 2013, 07:30:04 am »

No, some more testing is still needed.

Q2W · « **Reply #23 on:** April 09, 2013, 09:24:06 am »

wow, starting to look like the DSC could compete with the big boys. Stay with it!

Buckeye513 · « **Reply #24 on:** April 09, 2013, 09:49:33 am »

When you're done fine tuning the DCS 5 what's an estimated price point or range if you will? Give a range that way you're not locked in to low list me out raw, plated and plated/polished.

News:

Author Topic: DCS-Version 5 With Some Dyno Testing. (Read 5268 times)

Suzuki Quadracer HQ Store Zone