Author Topic: Stock clutch thickness (Read 870 times)

Stpltn250r · « **on:** August 20, 2016, 03:12:03 pm »

Anyone have a stock clutch laying around and care to measure the thickness of the fibers and steels? Preferably not an old worn out clutch set. Fairly new.

Rainman56 · « **Reply #1 on:** August 21, 2016, 05:58:58 am »

I can give ya the specs from the manual if you want?I do have some stock plates somewhere as well,though not sure how good they are.

Stpltn250r · « **Reply #2 on:** August 21, 2016, 06:38:17 am »

Well **** I forgot about that. Never mind I got a manual. ****. Thanks anyway

Stpltn250r · « **Reply #3 on:** August 21, 2016, 07:51:14 am »

Ok. It told me what the steel was. What's the fiber? I've looked online at Barnett and gave me a part number. Last digits of said are usually an indication of what thickness it is. That's the way it is for steels anyway. Does .100 sound about right for stock thickness fiber.

Side note Barnett sells cryo'd aluminum plates

Rainman56 · « **Reply #4 on:** August 22, 2016, 09:36:16 am »

My manual shows

Drive plate(fiber) .085" thickness.That,s right out of the Suzuki manual for the stock clutch.

Maybe someone can give you what the stack height of the clutch should be as well.

News:

Author Topic: Stock clutch thickness (Read 870 times)

Stpltn250r

Stock clutch thickness

Rainman56

Re: Stock clutch thickness

Stpltn250r

Re: Stock clutch thickness

Stpltn250r

Re: Stock clutch thickness

Rainman56

Re: Stock clutch thickness

Suzuki Quadracer HQ Store Zone