Author Topic: kickstarter **** clutch cover (Read 453 times)

87 RACER · « **on:** November 02, 2013, 09:32:37 pm »

After I shut the engine off the kick starter sprung forward and **** the clutch cover. Anyone know what could of caused this. I just ordered another clutch cover off ebay and don`t want the same to happen again.

Rainman56 · « **Reply #1 on:** November 02, 2013, 09:43:11 pm »

250 or 500?Did you have the kicker of resently?Having the splines "out of sync"would let the kicker too far forward and contact the cover.

87 RACER · « **Reply #2 on:** November 02, 2013, 09:53:47 pm »

yeah I had the kickstarter off to hook up the return spring it`s a 250. I just bought it and the kick starter return spring wasn`t hooked up. I aligned the two dots on the kick starter gear.And also the kick starter still isn`t returning I did everything by the book

LT500Kid · « **Reply #3 on:** November 03, 2013, 09:14:49 am »

spring probobly came out of its hole and bound up between the gear and inside of the case and **** it. Got a pic of it? pull side cover and inspect.

87 RACER · « **Reply #4 on:** November 07, 2013, 12:45:29 am »

How do you sync the splines of the kickstarter? When I installed it I put it at 12 o`clock.

Stpltn250r · « **Reply #5 on:** November 07, 2013, 05:45:56 am »

There are timing dots on the shaft and gear.

News:

Author Topic: kickstarter **** clutch cover (Read 453 times)

87 RACER

kickstarter **** clutch cover

Rainman56

Re: kickstarter **** clutch cover

87 RACER

Re: kickstarter **** clutch cover

LT500Kid

Re: kickstarter **** clutch cover

87 RACER

Re: kickstarter **** clutch cover

Stpltn250r

Re: kickstarter **** clutch cover

Suzuki Quadracer HQ Store Zone