Author Topic: Honda Leager A arms (Read 1328 times)

Serg500 · « **on:** December 03, 2013, 11:27:10 am »

I know some of you guys ride TRX250r I have a set of +2 +1 chrome leager A arms I payed 200 plus shipping so that's what I'm asking for them. Thanks

GrkGuy · « **Reply #1 on:** December 03, 2013, 01:14:40 pm »

fx4 should be all over these

Scawn · « **Reply #2 on:** December 03, 2013, 02:19:55 pm »

Are the tie rods, ball joints, or bushings for these included as well or is it just the arms?

Serg500 · « **Reply #3 on:** December 03, 2013, 02:26:54 pm »

Just the A Arms

Dezsled · « **Reply #4 on:** December 03, 2013, 02:27:48 pm »

Is that the T-pin set up?

Serg500 · « **Reply #5 on:** December 03, 2013, 03:00:06 pm »

I don't know if these are T-pin, I know I wanted chrome A arms for my leager but everything is different on my frame so FML.

Scawn · « **Reply #6 on:** December 03, 2013, 03:09:18 pm »

Quote from: Dezsled on December 03, 2013, 02:27:48 pm

Is that the T-pin set up?

I didn't even catch the lower a-arm is for a t-pin but you are correct. A buddy of mine just sold a t-pin setup a couple months ago. That's exactly what these are for.

Iceracer · « **Reply #7 on:** December 03, 2013, 03:58:28 pm »

What do you mean everything is different, at the frame or the spindle?

FX4Pitrone · « **Reply #8 on:** December 03, 2013, 04:15:28 pm »

I would if I had a protrax front end to go with it! I'd prob have to take out a second mortgage to buy the rest of the set up if I could even find them! Post this up on trx250r.org. I'm sure a couple guys would be all over these at that price!

Dezsled · « **Reply #9 on:** December 03, 2013, 05:48:14 pm »

At the spindle and the ball joints where they traditionally go. T-pin a arms were the front suspension to have in mx back when the 250r ruled.

Serg500 · « **Reply #10 on:** December 04, 2013, 01:34:20 am »

Ok ok will Somebody buy these

Dezsled · « **Reply #11 on:** December 04, 2013, 07:41:08 am »

The suggestion to post the a arms on trx250r.org is a good one. Those a arms have a better chance to be sold on a 250r site rather than on a Quadracer site.

Serg500 · « **Reply #12 on:** December 04, 2013, 09:37:45 am »

I have them on everything2stroke.com but ill try that other site. Thanks

Scawn · « **Reply #13 on:** December 04, 2013, 05:56:51 pm »

You can try trx250r.net as well. That site has been around quite a bit longer and most members of .org are also on .net. Would save you the hassle. Heck, if you want I'll post them up for you at .net since I'm an admin there. Just PM me the info you want posted.

Serg500 · « **Reply #14 on:** December 06, 2013, 02:31:49 pm »

These are sold thanks a lot Scawn your a good dude

Dezsled · « **Reply #15 on:** December 06, 2013, 05:23:09 pm »

Wouldn't think you'd have toomuch trouble gettin rid of t-pin parts

Scawn · « **Reply #16 on:** December 06, 2013, 08:21:07 pm »

No problem at all. Glad it went so quickly for ya. If I had a t-pin front end, we wouldn't have had to post it at all, LOL.

1986QuadRacer · « **Reply #17 on:** December 12, 2013, 03:52:29 am »

I was reading on 250r. Net or somewhere that Zuki arms fit on a Rhonda? They look like they would bolt right on.

Dangerouspower · « **Reply #18 on:** December 12, 2013, 07:03:34 am »

I was just reading on the 3 wheeler forum that a guy used honda a arms on his lt back in the 90s and he used zuki ball joints and spindles ect.

Dezsled · « **Reply #19 on:** December 12, 2013, 07:16:08 am »

Here's some '86-7 trx250r spindles on a laeger lt250

Serg500 · « **Reply #20 on:** December 12, 2013, 07:22:42 am »

That is Exactly what my leager front end looks like. Now I need spindles like that FML

Serg500 · « **Reply #21 on:** December 12, 2013, 07:28:31 am »

Is that a stock spindle

1986QuadRacer · « **Reply #22 on:** December 12, 2013, 08:04:42 am »

Looks like it

FX4Pitrone · « **Reply #23 on:** December 12, 2013, 04:42:36 pm »

Serg I have some stock honda250r spindles like that if you re looking....

Serg500 · « **Reply #24 on:** December 13, 2013, 09:12:34 am »

I need some for my leager, but it's suppose to be all Suzuki. I was looking at it last night and if I put the The right side on the left side And the left side on the right side it might work. I have the hubs and I believe there Suzuki, I'm going to look at the breaks also. I don't know much about honda spindles can Suzuki hubs and breaks work on it.

News:

Author Topic: Honda Leager A arms (Read 1328 times)

Suzuki Quadracer HQ Store Zone