Author Topic: Billet Intake (Read 2156 times)

Rainman56 · « **on:** August 12, 2013, 04:28:20 pm »

Is anyone still making the billet intakes to run bigger carbs on the 500,s?

Dezsled · « **Reply #1 on:** August 12, 2013, 05:10:38 pm »

Could someone post a pic ...

Kyle T · « **Reply #2 on:** August 12, 2013, 05:30:36 pm »

What is the point of one of these anyway? I never knew...

Motoman991 · « **Reply #3 on:** August 12, 2013, 05:57:58 pm »

This shows the billet intake on my hybrid.

Kyle T · « **Reply #4 on:** August 12, 2013, 06:07:09 pm »

Very sexiful. But what does it do?

Buckeye513 · « **Reply #5 on:** August 12, 2013, 06:09:07 pm »

It fits larger carbs Kyle and it can change the location of your carb by having it done on a different angle. The look alone is worth it IMO though.

Kyle T · « **Reply #6 on:** August 12, 2013, 06:09:56 pm »

Ah.
I lerned toodaye.

Buckeye513 · « **Reply #7 on:** August 12, 2013, 06:12:25 pm »

Like motoman is running a vm44 I'm not positive but I don't think the stock boot will fit it unless you bore out the rubber.

Dangerouspower · « **Reply #8 on:** August 12, 2013, 06:31:29 pm »

Im not sure but I imagine sblt does or would.

Rainman56 · « **Reply #9 on:** August 12, 2013, 06:36:51 pm »

sblt doesn,t list one but like you said I,m sure he could.Picked up a 44mm Lectron from badmoon I,ll eventually be putting on the 500 once I get finally put together so I,ll be in the market for one.Guess I could try posting in the wanted section?

Kyle T · « **Reply #10 on:** August 12, 2013, 06:38:35 pm »

Didn't Trinity used to blab about having a manifold for 44s?

Rainman56 · « **Reply #11 on:** August 12, 2013, 06:43:10 pm »

Quote from: Buckeye513 on August 12, 2013, 06:12:25 pm

Like motoman is running a vm44 I'm not positive but I don't think the stock boot will fit it unless you bore out the rubber.

Still don,t see it fitting and even if you could find a way to cram it in ya just know its gonna crack.

Nopick · « **Reply #12 on:** August 12, 2013, 07:05:52 pm »

Mike Steiner builds them. 500 Fanatic on here but he doesn't visit the forum very often.

http://www.suzukiquadracerhq.com/engine-builders/500fanatic-full-tilt-muscle-cars/

Here are some pics.

OneShotKyle · « **Reply #13 on:** August 12, 2013, 07:43:48 pm »

im gonna start partying out my zilla and have one of fanatics billet intakes for an 87 cylinder angled for a large carb. I have a 48hv lectron hangin off it right now. will begin the part out and disassembly this weekend I think. pm me if your interested

kyle

Rainman56 · « **Reply #14 on:** August 12, 2013, 07:54:29 pm »

Thanks for the offer but I need one to fit the smaller 6 bolt 88+ cylinder.

Buckeye513 · « **Reply #15 on:** August 12, 2013, 07:59:09 pm »

I want one for my 88 cylinder cause I eventually wanna have my 41.5 mikuni for trails and swap to a 50+ lectron for drags.

Rainman56 · « **Reply #16 on:** August 12, 2013, 08:01:40 pm »

Quote from: Nopick on August 12, 2013, 07:05:52 pm

Mike Steiner builds them. 500 Fanatic on here but he doesn't visit the forum very often.

http://www.suzukiquadracerhq.com/engine-builders/500fanatic-full-tilt-muscle-cars/

Here are some pics.

Thanks for the link/info.Appreciate it.I,ll let ya know what I find out.

Stpltn250r · « **Reply #17 on:** August 12, 2013, 08:33:36 pm »

500fanatic builds bigger intakes to. this one is for the liger. arctic cat intake to 54mm carb

Rainman56 · « **Reply #18 on:** August 13, 2013, 11:44:06 am »

Ordered my billet intake today.Great guy to deal with.

Buckeye513 · « **Reply #19 on:** August 13, 2013, 01:51:07 pm »

Quote from: Rainman56 on August 13, 2013, 11:44:06 am

Ordered my billet intake today.Great guy to deal with.

How much?

13.robb · « **Reply #20 on:** October 20, 2013, 05:50:29 pm »

Can you pm me his contact info, i am in need of an intake for an 87 250 cyl to fit a 38mm. Thanks. Robb

Zilla273 · « **Reply #21 on:** October 20, 2013, 06:24:02 pm »

x2 on that contact info, I really want one to run the vm44

Rainman56 · « **Reply #22 on:** October 20, 2013, 07:20:18 pm »

Contact info

http://api.viglink.com/api/click?format=go&key=c7a018f99a67aaac33a35421e795cdf3&loc=http%3A%2F%2Fwww.suzukiquadracerhq.com%2Fengine-builders%2F500fanatic-full-tilt-muscle-cars%2F&v=1&libId=45df8349-501b-4ab8-8ae8-52c988c8a958&out=http%3A%2F%2Ffulltiltmusclecars.com%2F&ref=http%3A%2F%2Fwww.suzukiquadracerhq.com%2Fengine-13%2Fbillet-intake%2Fmsg29201%2F%3Ftopicseen&title=500Fanatic%20%2F%20Full%20Tilt%20Muscle%20cars&txt=http%3A%2F%2Ffulltiltmusclecars.com%2F&jsonp=vglnk_jsonp_13823219677448

Mike is the guys name.

Rainman56 · « **Reply #23 on:** October 20, 2013, 07:25:43 pm »

Quote from: 13.robb on October 20, 2013, 05:50:29 pm

Can you pm me his contact info, i am in need of an intake for an 87 250 cyl to fit a 38mm. Thanks. Robb

A 38mm will fit in the stock boot.I run a 38mm lectron and it will fit in the stock boot with a little persuasion.I also have a new boot off a RM500/465 that bolts up to a bigger carb.Think its a tad big on a 38 but I,ll check.Would be cheaper than a billet one.

13.robb · « **Reply #24 on:** October 20, 2013, 10:27:38 pm »

Thanks Rainman, Yup caught between a decision of a new oem intake for $78, or get a custom one. Buuuuut since you mentioned it, tell me a lil more about the rm465/500 boot. I am running a 38mm pwk.

News:

Author Topic: Billet Intake (Read 2156 times)

Suzuki Quadracer HQ Store Zone