Author Topic: swing arm question (Read 759 times)

Qracer250alllday · « **on:** February 13, 2013, 04:31:05 pm »

My 87 needs a new swing arm are there any differences between the 87 - 92?

LT500Kid · « **Reply #1 on:** February 13, 2013, 05:27:19 pm »

91-92 use a different swinger on the 250's they are no link.

Qracer250alllday · « **Reply #2 on:** February 13, 2013, 05:28:28 pm »

So 87-90 will work

LT500Kid · « **Reply #3 on:** February 13, 2013, 05:34:17 pm »

Qracer250alllday · « **Reply #4 on:** February 13, 2013, 05:35:15 pm »

Ok is it possible to use the 91-92 what would you need the linkage off it too?

Rainman56 · « **Reply #5 on:** February 13, 2013, 06:02:25 pm »

Don,t think the 91-92 use the link.Shock goes from the swinger to the frame with no dog bone or pivot.

Quadster · « **Reply #6 on:** February 13, 2013, 06:16:13 pm »

91-92 has the linkage under the swingarm.

Qracer250alllday · « **Reply #7 on:** February 13, 2013, 06:27:23 pm »

So is the shock different also?

FX4Pitrone · « **Reply #8 on:** February 13, 2013, 07:10:35 pm »

Yes shock is different also... different rezzie line/mounting... and lower fork mounts on shock rather than eyelets....

SBLT500R · « **Reply #9 on:** February 13, 2013, 07:27:00 pm »

91-92 frame is also different where the upper shock mounts and where the lower linkage mounts to the frame.

just look for a 87-90 swingarm. theres plenty out there. could even use a 85-86 swingar but there prone to cracking around the bearing carrier.

Qracer250alllday · « **Reply #10 on:** February 13, 2013, 07:28:37 pm »

K thanks everyone

Qracer250alllday · « **Reply #11 on:** February 20, 2013, 10:06:14 am »

Hey guys I have another question the reason I think I need a new swing arm is because where it bolts thru the motor one side of the round part where the bolt slides thru is broken would I be able to weld that back together and get some use out of it? I can post a pic if it'll help your response

1989LT500Rzilla · « **Reply #12 on:** February 20, 2013, 12:06:15 pm »

Would a 500 swing arm fit on a 250 frame

Qracer250alllday · « **Reply #13 on:** February 20, 2013, 01:24:54 pm »

I have no idea

BadMoonRacing500 · « **Reply #14 on:** February 20, 2013, 01:49:15 pm »

Quote from: 1989LT500Rzilla on February 20, 2013, 12:06:15 pm

Would a 500 swing arm fit on a 250 frame

Yes, but it's 1 or 2 inches shorter than the 250 swinger, so it would only be useful for flattrack/ ice, and still might be too short.

News:

Author Topic: swing arm question (Read 759 times)

Qracer250alllday

swing arm question

LT500Kid

Re: swing arm question

Qracer250alllday

Re: swing arm question

LT500Kid

Re: swing arm question

Qracer250alllday

Re: swing arm question

Rainman56

Re: swing arm question

Quadster

Re: swing arm question

Qracer250alllday

Re: swing arm question

FX4Pitrone

Re: swing arm question

SBLT500R

Re: swing arm question

Qracer250alllday

Re: swing arm question

Qracer250alllday

Re: swing arm question

1989LT500Rzilla

Re: swing arm question

Qracer250alllday

Re: swing arm question

BadMoonRacing500

Re: swing arm question

Suzuki Quadracer HQ Store Zone