+-
« previous next »
Pages: [1]   Go Down

Author Topic: shock ? for lt500  (Read 468 times)

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 64
shock ? for lt500
« on: January 02, 2015, 03:44:29 pm »
so im looking for front shocks what shocks from other quads can fit my lt500 with out doing crazy mods
Logged

Share on Bluesky Share on Facebook

Offline

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 2209
  • Gender: Male
  • Location: ohio
Re: shock ? for lt500
« Reply #1 on: January 02, 2015, 05:55:15 pm »
Other shocks from a LT500.
There is not really a direct fit of shocks that fit from another bike. Best bet is to buy
New ones or used ones. One thing I learned is never buy a set of used shocks that are
Missing the rubber stops on the shaft. This means shocks are usually worn out or blown.
Logged
life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sidays totally worn out shouting "HOLY SH*T...WHAT A RIDE!"

Offline

  • CEO BRP
  • Trade Count: (0)
  • Trail Blazer
  • ******
  • Posts: 772
  • BRaP Small block 302, Released and Running
Re: shock ? for lt500
« Reply #2 on: January 05, 2015, 06:47:29 am »
Your almost never money ahead trying to retro fit existing shocks, they usally are not valved correctly sprung rite or the correct compressed and extended lengths, that said Banshee front shocks used to be the closest fit there 1/2 longer 14 3/4"
 If you could Find used ELKAs I can trim shock bodies or you can buy the correct lengths then you could order the proper shim stacks from ELKA and be very close.
as far as OEM shocks early YFZ 450 are 15 3/4 and have been used with Frame mods to be good with OEm a-arms. If you want to get new Arms Lance at Metaltech can configure something for you . 
Logged
Pages: [1]   Go Up
« previous next »
 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store