+-
« previous next »
Pages: [1]   Go Down

Author Topic: Z400 pegs fit what?  (Read 461 times)

Offline

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 37
Z400 pegs fit what?
« on: February 19, 2014, 11:04:28 pm »
I recall something about Z400 pegs bolting up to a Zilla chassis? Or fits with minor mods. Please fill me in. Searching  didn't turn up much
Logged

Share on Bluesky Share on Facebook

Offline

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 2493
  • Gender: Male
  • Location: Cincinnati OH
Re: Z400 pegs fit what?
« Reply #1 on: February 20, 2014, 07:16:43 am »
I have LTR pegs on my Zilla. They tilt slightly forward and require a spacer and longer bolts on the kicker side to clear the brake lever. Mount holes need drilled about a mm.




Logged

Offline

  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 1389
  • Gender: Male
  • Location: NWA
Re: Z400 pegs fit what?
« Reply #2 on: February 20, 2014, 07:27:39 am »
Try the honda 450rs.  With just a little mods they bolt right up and are flat.
Logged

Offline

  • Trade Count: (0)
  • Green Horn
  • ***
  • Posts: 84
Re: Z400 pegs fit what?
« Reply #3 on: February 20, 2014, 07:33:41 am »
Quote from: Q2W on February 20, 2014, 07:27:39 am
Try the honda 450rs.  With just a little mods they bolt right up and are flat.

What do you have to do to them as far as mods and are they any lower??
Logged

Offline

  • Trade Count: (0)
  • Elite Member
  • **********
  • Posts: 2493
  • Gender: Male
  • Location: Cincinnati OH
Re: Z400 pegs fit what?
« Reply #4 on: February 20, 2014, 08:10:26 am »
Anything you run other then oem Zilla pegs will be lower.
Logged

Offline

  • Trade Count: (0)
  • Newbie
  • **
  • Posts: 37
Re: Z400 pegs fit what?
« Reply #5 on: February 20, 2014, 09:01:21 am »
I have roll design pegs for a Z400. I thought with minor mods these would fit a Zilla. I want to sell the pegs. Just thought I would ask before I started a for sale tread.
Logged

Offline

  • Trade Count: (0)
  • Trail Blazer
  • ******
  • Posts: 626
  • Gender: Male
  • Location: Salem, Oregon
Re: Z400 pegs fit what?
« Reply #6 on: February 20, 2014, 10:09:47 am »
I do like the LTR pegs, even though they are pitched forward, I porbably dont have many options for my 250 though do I? just getting the cutom made ones.
Logged
04 CRF 450R----> My Beast
03 LTZ 400------> Wife's Boy Friend
90 LT 250R------> Done and Ripping
01 CR 125-------> Traded For the LT

Offline

  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 1389
  • Gender: Male
  • Location: NWA
Re: Z400 pegs fit what?
« Reply #7 on: February 20, 2014, 10:17:39 am »
Quote from: SamBoneLT500 on February 20, 2014, 07:33:41 am
Quote from: Q2W on February 20, 2014, 07:27:39 am
Try the honda 450rs.  With just a little mods they bolt right up and are flat.

What do you have to do to them as far as mods and are they any lower??


Yes, much lower.   PM alkyzilla.  He makes them ready to bolt up to the zilla.  They are made from roll designs and are twice as wide too.  Love them!
Logged

Offline

  • Trade Count: (0)
  • Forum Moderator
  • Elite Member
  • *********
  • Posts: 2058
Re: Z400 pegs fit what?
« Reply #8 on: February 20, 2014, 10:47:32 am »
I'd like to go with the trx450 roll pegs. The 660 raptor roll pegs are mounted alittle to tall
Logged
87 HPR LT500
04 Roll LOBO II TRX250R
06 LTR450
87 LT500
85 & 86 LT250
86 & 87 TRX250R
07 & 09 Husqvarna TE450
00 CR125R
Pages: [1]   Go Up
« previous next »
 

+- Suzuki Quadracer HQ Store Zone

http://www.suzukiquadracerhq.com/index.php?action=store