Suzuki Quadracer HQ
LT250R Quadracer => LT250R - Body / Chassis / Suspension => Topic started by: Carter Wolodko on September 02, 2020, 08:57:23 pm
-
Ok guys I have the yfz front hub conversion on my 1992 lt250r, Im running 3+2 offset dwt beadlocks on the front and have the factory width at the front of the machine at 44" I have installed 2006 z400 hubs and factory rims which look like they measure out at 3+5. my issue is that my back wheels are much wider then my fronts 44" vs 47" has anyone found a 9x8 inch aftermarket wheel with a 4+4 offset? i do plan on running +2 a arms in the near future which would put me at 48" on the front. i did plan on running at +2 rear axel as well but i cant seem to figure out what wheels guys are using with the z400 hub conversion. i do have a 2008 ltr450 as well my thoughts are running the ltr450 rear hubs vs the z400 rear hubs (supposed to at .75" in width vs the z400) with that i dont think i would need to run a +2 rear axel if I install ltr hubs
Thanks for any info