Suzuki Quadracer HQ

Suzuki Quadracer HQ Discussion => Suzuki Quadracer HQ - General Discussion => Topic started by: Sl_Avery on February 02, 2017, 08:42:19 pm

Title: Lt250 1985 after market crank questions
Post by: Sl_Avery on February 02, 2017, 08:42:19 pm
 New to the lt's. can anybody tell me if they make a hot rods crank for the 85 lt250 or what my best option would be?
Title: Re: Lt250 1985 after market crank questions
Post by: Iceracer on March 08, 2017, 06:32:26 am
OEM parts( pin, rod, bearing and washers) to rebuild your crank are available Id go that route.
No hotrods I know of possibly a NOS Vesrah kit out there but, OE is the best choice. 
Title: Re: Lt250 1985 after market crank questions
Post by: heinig27 on August 10, 2017, 11:15:42 am
Unfortunately as mentioned above there are no "aftermarket" cranks for the 85/86 LT's.  You can only rebuild them using either OEM stuff or Vesrah (what I used, found on ebay) and have a shop rebuild/press it back together.  My shop only charged $150 for this which I didn't think was too bad really.
Title: Re: Lt250 1985 after market crank questions
Post by: All American on November 06, 2017, 01:16:17 pm
And as far as I’m know, there aren’t any options to choose from.  It kind of suck, but this is a problem you are going to come across for almost anything aftermarket on an 85’ or an 86’ model.  It’s very limited.  I don’t know if this will help you but there is a man who can build a hand coned,.. hammered pipe.  He can build a heat shield for it too.  All for around $600.00.  Now that’s a raw pipe price.  The heat shield and finishing is extra.  If you can afford that, you will have something truly special.  Pipes for these two years are very RARE.... the only pipes available are oem and fmf.  The guys name is Kenny Roberts out of Southern California and all he needs is a 85 or 86’ model to build the pipe.  Fmf isn’t that bad but I think there is a better option if you can afford it.
Title: Re: Lt250 1985 after market crank questions
Post by: Wutchanut on December 02, 2017, 12:49:01 am
I'm like you I want to know you I'm not sure in answer. I do not know what to say.