Suzuki Quadracer HQ
LT250R Quadracer => LT250R - Body / Chassis / Suspension => Topic started by: Bhorn23 on March 10, 2014, 08:47:02 pm
-
Anyone ever use these? If so thoughts and or opinions?
-
I love mine! Great stance, very secure, provide a big boost in handling, super easy to install, no molesting your stock a arms.
Toe isn't set in the first picture.
(http://i1298.photobucket.com/albums/ag57/Buckeye513/null_zps8447b446.jpg) (http://s1298.photobucket.com/user/Buckeye513/media/null_zps8447b446.jpg.html)
(http://i1298.photobucket.com/albums/ag57/Buckeye513/09EF5D79-383A-4C6F-BA89-EFAE19CABDB4_zps2igeejfx.jpg) (http://s1298.photobucket.com/user/Buckeye513/media/09EF5D79-383A-4C6F-BA89-EFAE19CABDB4_zps2igeejfx.jpg.html)
(http://i1298.photobucket.com/albums/ag57/Buckeye513/F1B699F7-6661-4121-A4F0-89400081B1E2_zpseuad55gx.jpg) (http://s1298.photobucket.com/user/Buckeye513/media/F1B699F7-6661-4121-A4F0-89400081B1E2_zpseuad55gx.jpg.html)
-
thanks very much!
-
That upper ball joint looks like it's REAL close to binding up
-
Probably due to the chit banshee stock shocks I had on when that pic was shot.
-
To bad these came out after I cut off those tangs
:-\ :))
-
i also hade gotten them but have not installed yet ,do u just install and that is it or do u have to do adjustments?
-
Just pull the ball joint and factory bolt out insert shim onto ball joint push into a arm and reattach with supplied longer bolt and go. You should check your toe measuments and adjust your tie rods to a slight toe in. Mines set at like 1/8" of toe in if I remember right.
-
ok thanks Buckeye
-
Camber Shim Install Sheet
-
I wouldn't forget to Loctite the bolts on reassembly.
-
Lil dab of Blue Lock Tight will do, When you tighten that bolt with 7/8 wrench its on tight, you want to be able to take that bolt out sometime down the road without needing a 125psi impact gun or 6ft cheater bar.
-
lol ok thanks guys!
-
Here's a couple pics from my bike after installing the mod at Glamis this last weekend. After finally getting the bike running I have to say the mod does make a difference, especially when riding the bowls and cresting the razors. It holds the front in a straighter line instead of drifting down with the stock camber.
-
I am curious to where you guys are getting the camber shims from.
-
http://www.suzukiquadracerhq.com/index.php?action=store;sa=view;id=70
-
Does anyone know where I can buy Camber shims? The website below shows out of stock.
-
Having some made should be done soon.
-
Put me down for a set mitch please
-
Sorry didn't read what quad these were for .
NEED FOR A 87 500 mitch.( Not sure if they interchange)
-
That is good news. Put me down for 2 sets please.
-
Does anyone know what I should set toe in to after camber adjustment and bump steer mod?