Suzuki Quadracer HQ

LT250R Quadracer => LT250R - Body / Chassis / Suspension => Topic started by: Fastonmxedgass250 on July 10, 2013, 02:59:09 am

Title: zilla a arm swap
Post by: Fastonmxedgass250 on July 10, 2013, 02:59:09 am
Has anyone tried to fit zilla a arms onto a 87-92 250?  I looked all over but I couldn't find anything about it I'm sure its been done for the extra width if anyone has tried is like to know what needs to be done to do this thanks in advance
Title: Re: zilla a arm swap
Post by: GrkGuy on July 10, 2013, 04:48:23 am
put the left on the right and the right on the left, you will need zilla tie rods also.
Title: Re: zilla a arm swap
Post by: Fastonmxedgass250 on July 10, 2013, 09:14:48 am
Ok I'll try it out thanks!
Title: Re: zilla a arm swap
Post by: Shook on July 10, 2013, 01:05:28 pm
Do the 250 shocks work or do you need zillas?
Title: Re: zilla a arm swap
Post by: Dezsled on July 10, 2013, 02:52:44 pm
How much wider is the swap when completed? Does it lengthen the wheelbase? Does the swap work on a '85-6 lt250? Thanks for any input....
Title: Re: zilla a arm swap
Post by: Shook on July 10, 2013, 02:55:36 pm
Also anyone got pics of this swap? Would this work to clear a aaen pipe on a hybrid? Thanks
Title: Re: zilla a arm swap
Post by: GrkGuy on July 10, 2013, 07:19:08 pm
it gives you plus foward not sure how much tho, i used the zilla front shocks but mine is on a hybrid.
plus zilla shocks can be rebuilt.
Title: Re: zilla a arm swap
Post by: Chuckie25 on September 22, 2013, 11:37:12 pm
Any other benefits from doing this swap?
Title: Re: zilla a arm swap
Post by: Dangerouspower on September 23, 2013, 06:00:16 am
Bump.
Title: Re: zilla a arm swap
Post by: whitetrash2stroke on November 14, 2016, 02:39:59 pm
Will 88 a arms of an lt fit an 85?