Suzuki Quadracer HQ
LT500R Quadracer => LT500R - Body / Chassis / Suspension => Topic started by: FX4Pitrone on April 08, 2013, 07:45:52 pm
-
Can anyone give me some actual measurements on a Zilla if you have it? Or help figuring it out?
Metal-tech stock length front A-arms (stock length shocks) w/ Z400 spindles and 4+1 wheels
vs.
Stock Zilla (88+) front arms, shocks and 3+2 wheels
Looking for actual front end width of each if anyone is able to help out
47.4 = stock zilla width w/ stock 4+1.5 wheels...so that would mean...
48.4 = stock zilla w/ 3+2 wheels...correct?
and the Z400 hub/spindle add 1 3/4" to total front end width over stock Zilla....assuming that # is done w/ stock 4+1.5 and not 3+2 (or am I wrong here?)... so
about 49.1 = Metal tech stock length arms, z400 spindles/hubs w/ stock Zilla wheel offset (4+1.5)....so
48.1 = Metal tech stock length arms, Z400 spindles/hubs w/ 4+1 wheels
Am I correct here or not? Basically I'm wanting to get the width of a stock Zilla w/ 3+2 wheels vs. a Metal tech front end w/ 4+1 wheels....
Thanks for reading my long-winded post!
-
Ok... so figured this out myself this weekend for anyone else wondering....
I measured:
Stock Zilla arms, 3+2 wheels= 47.5"
Metal tech arms w/ Z400 spindles/hubs and 4+1 wheels= 48.5"
here are some pics....
Metal tech set-up w/ 4+1 wheels on left, stock on right w/ 3+2 wheels
(http://i1079.photobucket.com/albums/w513/fx4pitrone/1989%20Suzuki%20Quadzilla%20restoration/P4122048_zpsd6fea2ba.jpg) (http://s1079.photobucket.com/user/fx4pitrone/media/1989%20Suzuki%20Quadzilla%20restoration/P4122048_zpsd6fea2ba.jpg.html)
Metal-tech arms w/ Z400 spindle/hub, YFZ450 calipers:
(http://i1079.photobucket.com/albums/w513/fx4pitrone/1989%20Suzuki%20Quadzilla%20restoration/P4122050_zps628e6392.jpg) (http://s1079.photobucket.com/user/fx4pitrone/media/1989%20Suzuki%20Quadzilla%20restoration/P4122050_zps628e6392.jpg.html)
Stock arms/spindles/hubs/calipers:
(http://i1079.photobucket.com/albums/w513/fx4pitrone/1989%20Suzuki%20Quadzilla%20restoration/P4122049_zps1f595083.jpg) (http://s1079.photobucket.com/user/fx4pitrone/media/1989%20Suzuki%20Quadzilla%20restoration/P4122049_zps1f595083.jpg.html)
-
(http://i1079.photobucket.com/albums/w513/fx4pitrone/1989%20Suzuki%20Quadzilla%20restoration/P4122051_zps09fb5897.jpg) (http://s1079.photobucket.com/user/fx4pitrone/media/1989%20Suzuki%20Quadzilla%20restoration/P4122051_zps09fb5897.jpg.html)
(http://i1079.photobucket.com/albums/w513/fx4pitrone/1989%20Suzuki%20Quadzilla%20restoration/P4122052_zpse936267c.jpg) (http://s1079.photobucket.com/user/fx4pitrone/media/1989%20Suzuki%20Quadzilla%20restoration/P4122052_zpse936267c.jpg.html)
-
And stock 88+ Zilla stem vs. Metal-tech chromoly anti-vibe stem w/ LSR clamp:
(http://i1079.photobucket.com/albums/w513/fx4pitrone/1989%20Suzuki%20Quadzilla%20restoration/P4132055_zps14dd9aad.jpg) (http://s1079.photobucket.com/user/fx4pitrone/media/1989%20Suzuki%20Quadzilla%20restoration/P4132055_zps14dd9aad.jpg.html)
(http://i1079.photobucket.com/albums/w513/fx4pitrone/1989%20Suzuki%20Quadzilla%20restoration/P4132056_zpse3da2b8a.jpg) (http://s1079.photobucket.com/user/fx4pitrone/media/1989%20Suzuki%20Quadzilla%20restoration/P4132056_zpse3da2b8a.jpg.html)
-
Bump for MDS2smoker!!
-
And FYI... my 4+1's I used for these measurements were w/ ITP Baja's.... I have since got a set of Hi-per 4+1's and OMF 4+1 which I have read are more of a "true" or accurate 4+1....
-
Sweet!! Thats exactly what i was looking for! The pics really show what i was after. This popped in my mind after i remembered how close the inner lip was on my buddies kfx400 with itp baja fronts at 3+2... The 4+1 was not gonna clear the upper ball joint. Thanks fx4.
-
No prob! Yea OMF would not put the inner reinforcing ring on the 4+1 rims I ordered due to clearance issues. So I got the yellow label rolled lip w/ outer reinforcing ring. "bones" said that would be my strongest set up
-
So what shocks are people running with these arms?
I have the same set up
-
I'm running Elka stage threes. Zilla shocks
-
Here's some +1" forward +1" wider metal tech a arms with 16.5" trx450 shocks using z400 spindles & 3x2 rims. At full droop it 50" wide
(http://i83.photobucket.com/albums/j300/Dezsled/photo98.jpg)
(http://i83.photobucket.com/albums/j300/Dezsled/photo99.jpg)
(http://i83.photobucket.com/albums/j300/Dezsled/photo96.jpg)
-
Ok... so figured this out myself this weekend for anyone else wondering....
I measured:
Stock Zilla arms, 3+2 wheels= 47.5"
Metal tech arms w/ Z400 spindles/hubs and 4+1 wheels= 48.5"
here are some pics....
Metal tech set-up w/ 4+1 wheels on left, stock on right w/ 3+2 wheels
(http://i1079.photobucket.com/albums/w513/fx4pitrone/1989%20Suzuki%20Quadzilla%20restoration/P4122048_zpsd6fea2ba.jpg) (http://s1079.photobucket.com/user/fx4pitrone/media/1989%20Suzuki%20Quadzilla%20restoration/P4122048_zpsd6fea2ba.jpg.html)
Metal-tech arms w/ Z400 spindle/hub, YFZ450 calipers:
(http://i1079.photobucket.com/albums/w513/fx4pitrone/1989%20Suzuki%20Quadzilla%20restoration/P4122050_zps628e6392.jpg) (http://s1079.photobucket.com/user/fx4pitrone/media/1989%20Suzuki%20Quadzilla%20restoration/P4122050_zps628e6392.jpg.html)
Stock arms/spindles/hubs/calipers:
(http://i1079.photobucket.com/albums/w513/fx4pitrone/1989%20Suzuki%20Quadzilla%20restoration/P4122049_zps1f595083.jpg) (http://s1079.photobucket.com/user/fx4pitrone/media/1989%20Suzuki%20Quadzilla%20restoration/P4122049_zps1f595083.jpg.html)
Hi there, do you know if the z400 and the ltz400 spindles/hubs/rotor are the same?
I want to do the swap but I'm not sure if there's any difference.
-
Ok... so figured this out myself this weekend for anyone else wondering....
I measured:
Stock Zilla arms, 3+2 wheels= 47.5"
Metal tech arms w/ Z400 spindles/hubs and 4+1 wheels= 48.5"
here are some pics....
Metal tech set-up w/ 4+1 wheels on left, stock on right w/ 3+2 wheels
(http://i1079.photobucket.com/albums/w513/fx4pitrone/1989%20Suzuki%20Quadzilla%20restoration/P4122048_zpsd6fea2ba.jpg) (http://s1079.photobucket.com/user/fx4pitrone/media/1989%20Suzuki%20Quadzilla%20restoration/P4122048_zpsd6fea2ba.jpg.html)
Metal-tech arms w/ Z400 spindle/hub, YFZ450 calipers:
(http://i1079.photobucket.com/albums/w513/fx4pitrone/1989%20Suzuki%20Quadzilla%20restoration/P4122050_zps628e6392.jpg) (http://s1079.photobucket.com/user/fx4pitrone/media/1989%20Suzuki%20Quadzilla%20restoration/P4122050_zps628e6392.jpg.html)
Stock arms/spindles/hubs/calipers:
(http://i1079.photobucket.com/albums/w513/fx4pitrone/1989%20Suzuki%20Quadzilla%20restoration/P4122049_zps1f595083.jpg) (http://s1079.photobucket.com/user/fx4pitrone/media/1989%20Suzuki%20Quadzilla%20restoration/P4122049_zps1f595083.jpg.html)
Hi there, do you know if the z400 and the ltz400 spindles/hubs/rotor are the same?
I want to do the swap but I'm not sure if there's any difference.
What I mean is what year of z400 spindles/hubs/rotors are you using? 03-04, 05-08 or 09-14?
-
@ATACAZILLA
z400 and the ltz400 is the same bike. u know that north americans are pretty concise with their abbreviations. we europeans tend to always write it all out :)))
I installed my z400 hubs / rotors that came off a 2006 make if that helps in any way ;)