Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Engine => Topic started by: Petenorth on January 15, 2013, 05:25:43 pm

Title: Re: Water pump impeller bolt
Post by: Petenorth on January 17, 2013, 07:41:04 am

Don't have a manual. So can the spring be damaged by over tightening it? I just held the impeller with my fingers, used a dab of blue lock tight, and tightened it up good.

Title: Re: Water pump impeller bolt
Post by: GrkGuy on January 15, 2013, 06:57:11 pm

just snug it up and use blue lock tite, its reverse thread so it wont back out.

Title: Re: Water pump impeller bolt
Post by: Deebo on January 15, 2013, 06:39:16 pm

Should be in the manual.  Do you have one?

Title: Re: Water pump impeller bolt
Post by: Petenorth on January 15, 2013, 05:45:50 pm

My bolt just needed tightened. Just don't wanna damage nothing

Title: Re: Water pump impeller bolt
Post by: Derrik on January 15, 2013, 05:31:38 pm

i know driving that seal with the spring in is a bit tricky,i **** one already -_- i dont seem to have a socket that works

Title: Water Pump Impeller Bolt
Post by: Petenorth on January 15, 2013, 05:25:43 pm

What does it torque at and can you over tighten it and mess up the spring seal behind it?