Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Engine => Topic started by: GrkGuy on January 08, 2013, 10:16:37 pm

Title: Re: new motor break-in and jetting.
Post by: GrkGuy on January 09, 2013, 07:34:55 am

oh yeah i forgot about that, lol
its sorta coming back to me now.

Title: Re: new motor break-in and jetting.
Post by: Deebo on January 08, 2013, 11:45:49 pm

Increase throttle position each cycle. 1/4 1/2 3/4 full throttle. Each cycle 10 minutes or so. First
Cycle static with a fan on the motor.  Let the motor cool all they way down between cycles and retorque

Title: Re: new motor break-in and jetting.
Post by: GrkGuy on January 08, 2013, 10:50:25 pm

yeah yeah yeah, so what are the temps.
125
150
175
190
wait till it cools to 100 before i start again. ICRS

Title: Re: new motor break-in and jetting.
Post by: Deebo on January 08, 2013, 10:27:01 pm

Heat cycles grk!!!

Title: new motor break-in and jetting.
Post by: GrkGuy on January 08, 2013, 10:16:37 pm

ok its been awhile since I had to do a break-in, can someone give me the steps again.

thanks in advance.

motor is a true 540HRD, this one does not have a long piston life, tons taken out of the intake and bridge.
carb 42mm mikuni, running the air box with a k&n and no lid. also has billet intake with v2 reeds.
110oct at 24.1 927oil
LRD low boy pipe

and any idea on where to start with the jetting, i am about 500 to 1200elv, and temps going to be lower 60's

i think thats everything