Suzuki Quadracer HQ
LT250R Quadracer => LT250R - Body / Chassis / Suspension => Topic started by: Andys92 on January 07, 2013, 11:49:57 am
-
lt250rwv. yes it is where the shock slides over the linkage. thanks for letting me know about the bearings .
iceracer . also thanks .i had no idea it was called a cushion lever .
thanks .
-
Its called a. cushion lever.
-
Is it the linkage or the shock bearing i had same problem with mine But it was the shock bearing on mine ..Is it where shock open and slides over the linkage because it takes the same bearing as the 87 to 90 shock bearing. But it is in the linkage instead of the shock like the 87 to 90 models. PART THE OME parts number for the bearing is 62175-00B00 but its like 44 dollars and you have to get 2 oem parts 62657-34A01 which are clips Then you need to dust seal parts number is 62226-28C00 Also you need a 2 Spacer parts number is 62684-28C10 .You would have more money in buying oem parts for this bearing then going to
Ebay and buying a whole 91 -92 shock linkage kit for your quad.Like i said if your bearing is bad where the shock slides over.You can buy a 87 to 90 shock beaRING KIT OFF EBAY FOR LIKE 20$ or so alot cheaper the going OME parts
-
just noticed the bearing (?) at bottom of rear shock is shot.Have looked all over ,my clymer only does up to 1990 swing arm and all website s i have looked at is the same .none have a oem 1992 picture which shows 1992 linkage. i need proper name or part number for the replacement bearing where the bottom of the rear shock attaches. i will keep looking but i must be doing or calling it the wrong name or something. Thanks in advance.