Suzuki Quadracer HQ

LT500R Quadracer => LT500R - Engine => Topic started by: Dave1187 on January 01, 2013, 08:46:12 pm

Title: Re: need help on timing ?
Post by: 1986QuadRacer on January 02, 2013, 06:07:42 pm

With other small engines a mark is sometimes hard to see or maybe painted over, dirty, you might not be at the right angle to see it like on a sled. A scribe or a light tap with a cold chisel and brass hammer before takin apart a running mill is a nice headache saver later on.

Title: Re: need help on timing ?
Post by: GrkGuy on January 02, 2013, 08:03:05 am

behind the fly wheel is the stator plate,
there is a raised mark on it at the top, make sure it is lined up
with mark on the case. try to get it lined back up, just 3 phillips screws hold it in place.

Title: need help on timing ?
Post by: Dave1187 on January 01, 2013, 08:46:12 pm

I just recently replaced my flywheel on my 87 500 because the keys snapped off the flywheel and now it won't start I was told that timing might be off but I'm not sure how to do this could some one give me a few pointers on this thanks