Suzuki Quadracer HQ

LT500R Quadracer => LT500R- Exhaust => Topic started by: Julle74 on December 30, 2012, 03:42:23 am

Title: Re: Pipe I.D. Question
Post by: Rainman56 on January 07, 2013, 06:23:09 pm: I,ve got a 250 hand coned pipe that I never found out who the maker was either.Guy I got mine from said a guy I think on 3 wheeler world makes some hand coned pipes.May want to ask around over there if your ambitious.

Heres that 250 pipe which I used to run before the Aaen thats on now.

](http://i1109.photobucket.com/albums/h425/Rainman56/001.jpg) (ftp://i1109.photobucket.com/albums/h425/Rainman56/001.jpg[/IMG)
Title: Re: Pipe I.D. Question
Post by: WestTexasKing on January 07, 2013, 06:17:44 pm: I've got a ct, and the bends don't look quite right.
It could be one of several older pipes ???
Title: Re: Pipe id question
Post by: MrMendo2 on January 06, 2013, 11:33:13 pm: I have the ct pipe. But it's the exhaust that comes out at your knee.
Title: Re: Pipe id question
Post by: GrkGuy on January 06, 2013, 09:07:16 pm: migth be a ct pipe
Title: Re: Pipe id question
Post by: WestTexasKing on January 06, 2013, 02:22:51 am: That's not the original FMF pipe, is it?
Supposedly copied from another design, it was a decent pipe.
Title: Re: Pipe id question
Post by: Julle74 on January 04, 2013, 01:08:45 pm: Thanx for the Dynoport pic +k2 Clearly thats not it. I have seen pics of old Aaen mx-pipe on the site that were shut down. And this pipe is similar but more sections (27 from flange to stinger) and the welds are much sweeter on this one. Someone really put some time into building this pipe.
Title: Re: Pipe id question
Post by: Twinzilla on January 02, 2013, 08:37:34 pm: Dynoport pipe:

(http://i265.photobucket.com/albums/ii239/twinzilla/IM000646.jpg)

(http://i265.photobucket.com/albums/ii239/twinzilla/IM000644.jpg)
Title: Re: Pipe id question
Post by: Twinzilla on January 02, 2013, 12:38:31 pm: I replied on the other site, and that's not a Dynoport. I have a Dynoport that I'll post pics of later. My guess on your pipe is old-school Aaen.
Title: Re: Pipe id question
Post by: Mitch Keller on January 01, 2013, 11:39:04 pm: Hard to tell who made it!
Title: Re: Pipe id question
Post by: PCS on January 01, 2013, 09:06:51 pm: here is a dynoport on ebay
http://www.ebay.com/itm/LT500R-LT500-500-QUADRACER-QUADZILLA-DYNO-PORT-LOW-BOY-EXHAUST-SYSTEM-87-90-/400276476002

i could be wrong but all of the dyno port pipes ive seen have their id plate welded on the pipe.
Title: Re: Pipe id question
Post by: Julle74 on December 30, 2012, 03:49:08 am: One more pic(http://i1293.photobucket.com/albums/b596/Johanjuhlin/028_zps6fe5809a.jpg)
Title: Pipe I.D. Question
Post by: Julle74 on December 30, 2012, 03:42:23 am: Hi everyone! Iam a new member from Sweden. I have this pipe, was told on the other forum that it could be a Dynoport pipe. The exhaust flange have inner and outer sleeve, it have supernice Tig welds. If someone have a pic of an old Dynoportpipe can you please post a pic. Thanx Johansuzukiquadracerhq(http://i1293.photobucket.com/albums/b596/Johanjuhlin/002_zps261b1859.jpg)(http://i1293.photobucket.com/albums/b596/Johanjuhlin/002_zps261b1859.jpg)(http://i1293.photobucket.com/albums/b596/Johanjuhlin/005_zps58f6c84a.jpg)(http://i1293.photobucket.com/albums/b596/Johanjuhlin/003_zpsbf2152f7.jpg)